Cut Sheet

Catalog No./Item Description/Specifications
Bodies
“A” X-Unit – Used to connect two intersecting runs
WD06W350-X 6" [152mm] of Wallduct at a 90° angle. Includes one pair of
WD10W350-X 10" [254mm] coupling angles, one wire retainer, and assembly
WD18W350-X 18" [457mm] screws. Complete unit requires one body and one
cover plate.
Surface Covers
“B”
CP06-XS 8" [203mm]
CP10-XS 12" [304mm]
CP18-XS 20" [508mm]
Flush Covers
“B”
CP06-XF 8" [203mm]
CP10-XF 12" [305mm]
CP18-XF 20" [508mm]
“A” X-Unit Crossover – Used to provide a 90°
WD10W350-XTUN 6 7/8" [174mm] angle – 3" [76mm] compartment with crossover
WD18W350-XTUN 14 7/8" [377mm] in X-Unit. Assembly screws included.
NOTE: Not available for 6" [162mm] wide Wallduct.
WD10W350-3TUN X-Unit Tunnel – Provides three equal
WD18W350-3TUN compartments for separation of services
in X-Unit. Assembly screws included.
Purchase partition, Catalog No. WD350-P60
separately to complete installation. Complete
X-Unit assembly requires two X-unit tunnel units.
NOTE: Not available for 6" [162mm] wide Wallduct.
“A” Sweep Elbow – Used to connect vertical and
WD06W350-SES 6" [152mm] horizontal runs of Wallduct at a 90° angle with
WD10W350-SES 10" [254mm] a 45° internal sweep radius. Includes one pair
WD18W350-SES 18" [457mm] of coupling angles and assembly screws. For
partition use Catalog No. WD350-PSE Series.
NOTE: Not available in flush cover version.
WD350-PSE Internal Sweep Elbow Partition – Used with past
#WDXWX-SES to partition elbow.
7
Wallduct Fittings
(Continued)
B
B
A
A
3 1/2"
[89mm]
3"
[76mm]
3 1⁄4"
[83mm]
1"
[25mm]
A
Partition
Partition
Bridge
Partition
Tunnel
Partitions
A
14"
[356mm]
14"
[356mm]
3 1⁄2"
[89mm]
3 1⁄2"
[89mm]
NOTE: To order aluminum products, add the letter “A” to the beginning of the catalog number.
Two tunnels shown.
3.878"
[98.50mm]
9.987"
[253.67mm]
3 1/2"
[88.90mm]