Cut Sheet

9
Catalog No./Item Description/Specifications
Surface Covers
“A” Access Cover Plate – Two-piece cover with
WD06-ACPS 6" [152mm] grommeted hole in center. Can be installed at any
WD10-ACPS 10" [254mm] location by match drilling eight holes in duct body
WD18-ACPS 18" [457mm] flanges and attaching speed nuts. Includes
assembly screws and grommet. Use 5/16"
Flush Covers
“A”
[7.9mm] diameter drill for speed nuts.
WD06-ACPF 7" [178mm]
WD10-ACPF 11" [279mm]
WD18-ACPF 19" [482mm]
Sweep Tee
“A” Sweep Tee – Used to connect horizontal and
WD06W350-SWTS 6" [152mm] vertical runs of Wallduct at a 90° angle with
WD10W350-SWTS 10" [254mm] sweep radius. Includes one pair of coupling
WD18W350-SWTS 18" [457mm] angles and assembly screws.
NOTE: Not available in flush cover version.
Flanged Connector
“A” Flanged Cabinet Connector – Used to connect
WD06W350-FCCS 16" [406mm] end of Wallduct run to panel cabinet. Assembly
WD10W350-FCCS 22" [559mm] screws included. Use .166" [4.2mm] diameter
WD18W350-FCCS 24" [610mm] (#19 drill) for assembly.
WD06W350-FCCF 18" [4570mm] NOTE: Not available in aluminum.
WD10W350-FCCF 24" [610mm]
WD18W350-FCCF 26" [660mm]
Ceiling Drop Out “A” Ceiling Drop Out – Used to drop cables and
WD-10CDO 4" [102mm] to 5 3/4" [146mm] wires from Wallduct in ceiling to imaging
WD-10CDOD 5 1/2" [140mm] to 7 1/4" [184mm] equipment. Available in 10" [254mm] width only.
Units have adjustable depth.
Wallduct Accessories
(Continued)
6"
[152mm]
3"x 8" [76mm x 203mm] Hole
A
12"
[305mm]
A
10"
[254mm]
10"
[254mm]
10"
[254mm]
A
A
6"
[152mm]
NOTE: To order aluminum products, add the letter “A” to the beginning of the catalog number.
Part No: Description/Specifications
1002412 Hardware Bag – Eight pieces
10-32 x 1/4" screws and
twelve pieces of 10-32 x 7/16"
screws for attaching steel
Wallduct components.
1000883 Hardware Bag – Twelve pieces
10-32 clips for attaching
steel or aluminum cover plates.
Part No: Description/Specifications
1002414 Hardware Bag – Eight pieces
10-32 x 1/2" stainless steel
screws and eight pieces of
10-32 x 1/4" stainless steel
screws for attaching aluminum
Wallduct components.
Wallduct Replacement Hardware