Cut Sheet

Wiremold
®
WallSource Multiple Service Boxes provide
power and communications connectivity through a
single access point in the wall.
Keeping up with technology advancements is a
breeze! By using 5507 Series Faceplates, WallSource
Multiple Service Boxes can accommodate a wide range
of power, communication, and A/V solutions.
WallSource Boxes quickly mount in walls with
standard 16" [406mm] on center studs. Adjustable
mounting brackets offer the flexibility to flush mount
WallSource Boxes within multiple wall thicknesses.
Knockouts located in both the top and bottom of
WallSource Boxes provide easy access for a variety
of power, communication, and A/V services. Easy-to-
install slide-in dividers provide separation for power and
communication or A/V wiring.
WIREMOLD
®
WallSource
™
Multiple Service Boxes
ED864R14 – Updated March 2014 – For latest specs visit www.legrand.us/wiremold
A single box for multiple services
WallSource box shown with an angled raceway adapter.
FEATURES & BENEFITS
n Adjustable mounting brackets. Allow WallSource Boxes
to be flush mounted in 1/2", 5/8", 1" and 1 1/4" [12.7mm,
15.9mm, 25mm and 32mm] wall thicknesses. Provide a
flush, clean installation every time.
n Color options. Device mounting brackets and trim rings
are available in white, ivory, black, gray, and light gray to
match any decor.
n Dividers. Field installed barriers provide shielding to allow
communications and power within a single in-wall box.
n Knockouts. 1/2", 3/4", 1", and 1 1/2" trade size openings
located in both the top and bottom of WallSource Boxes
provide multiple service flexibility.
n System flexibility. Using the WSA86 Backfeed Kit with the
WSA42-4 WallSource Box provides service access for
wall-mounted divided raceway systems.
n 5507 Series faceplate compatible. These aesthetically-
pleasing faceplates accept a wide range of power,
communication, and A/V solutions
n Compatible with A/V devices by using 5507 Series
Faceplates.
n Increased productivity. Housing power, communication,
and A/V services within one aesthetically-pleasing in-wall
box eliminates the need for multiple drops and saves
installation time.
n Concealed fiber storage spool. Holds 18" [457mm] of
excess cabling for future expansion.
n Open architecture device mounting bracket. WSA00-4
Device Mounting Bracket accommodates a wide range of
industry standard electrical and communication devices
and faceplates (WSA42-4 Box only).
n Datacom connectivity options. Accepts industry
standard and proprietary devices from a wide range of
manufacturers to provide a seamless and aesthetically
pleasing interface for voice, data, audio, and video
applications at the point of use.
n
j
UL Listed File E2961.
INSTALLATION FLEXIBILITY:
For a flexible wiring system, install four-
gang WallSource box during construction
to house the wire and cabling to feed a
surface raceway system.