Cut Sheet

3
Catalog No./Item Description/Specifications
5507AD* Modular Furniture Adapter –
Mounts Activate modular
furniture bezel and other
modular furniture adapters.
5507B* Blank Faceplate – Covers
unused compartments in the
device bracket.
5507D*
Duplex Faceplate –
Covers duplex style devices.
Accepts 106 Frame.
5507R* Rectangular Faceplate –
Covers rectangular
style devices.
5507S*
Rectangular Spacer – For
mounting commercial device
plates. Installs between the
device bracket and a device.
5507SW*
Switch Faceplate – Covers
standard toggle switches.
5507T1*
Single Receptacle
Faceplate – Covers single
receptacles – 1.59"
[40mm] diameter.
5507T2* Single Receptacle
Faceplate – Covers single
receptacles – 1.41"
[36mm] diameter.
5507RJ* Dual RJ11/RJ45 Connector
Faceplate – Mounts one or two
RJ keystone type connectors –
has one opening and a KO for
the other.
5507FRJ* Flush Dual RJ11/RJ45
Connector Faceplate – Same
as 5507RJ except the connectors
are recessed to provide a
flush installation.
5507AAP Extron
®
AAP Faceplate –
5507AAP-WH Accepts two Extron
®
Electronics
5507AAP-G AAP single space modules.
5507AAP-FW
Catalog No./Item Description/Specifications
5507MAAP Extron
®
MAAP Faceplate –
5507MAAP-WH Accepts two Extron
®
Electronics
5507MAAP-G MAAP single space modules.
5507MAAP-FW
5507-4TJ* Ortronics Faceplate – Mounts
Ortronics datacom inserts.
Accepts four TracJack Devices.
5507-6TJ* Ortronics Faceplate – Mounts
Ortronics datacom inserts.
Accepts six TracJack Devices.
ARA-S2 Angled Raceway Adapter – For
use with multi-channel raceway
device brackets and WallSource
device mounting brackets. Angled
exit provides additional mounting
depth required for A/V connections
as well as ensuring the required
bend radius for UTP and fiber optic
cabling. Holds two Ortronics
®
Series II modules.Fits 5507 Series
Faceplate opening.
CM-ARA Angled Raceway Adapter – For
use with multi-channel raceway
device brackets and WallSource
device mounting brackets. Angled
exit provides additional mounting
depth required for A/V connections
as well as ensuring the required
bend radius for UTP and fiber optic
cabling. Holds two CM2 Series
modules or two Pass & Seymour
®
2A inserts. Fits 5507 Series
Faceplate opening.
CM-EPLA* End Plates – Includes two
outlet identification labels with
clear covers and two matching
screw covers. Required for
mounting Pass & Seymour
Activate and Wiremold CM2 Open
System communication modules
into 5550 Series device brackets.
S2-EPL End Plates – Includes two
outlet identification labels with
clear covers and two matching
screw covers. Required for
mounting Ortronics Series II
modules into 5550 Series
device brackets.
5507 Series Faceplates
NOTE: All faceplates are 4 1/4" long x 1 11/16" wide [108mm x 43mm].
* Available in Ivory finish or add “-WH” suffix for White finish.