Cut Sheet

3
WSMEDTC72SLSK Modular Power & Work Surface Portal Quick Kit for 6'
WSMEDTC72SLSK-2 Table – Kit contains two 4 wire, 2 circuit connectorized
cables each 31.5" in length (one M/F and one F/F) with
black cable covers and 4 cable clamps for mounting. Also
one work surface portal with 2 power outlets accessible
from table surface and 2 convenience power outlets
accessible from under the table, 2 keystone openings for
communications and one silver flange cover. Portal is wired
for circuit 1. For circuit 2 wired portals, order the "-2"
suffixed part number.
Part Number Configurator
Power:
Modular Power
Enhanced Portal = ME
Modular Power
Standard Portal = MP
Corded Power
Enhanced Portal = CE
Work Surface
Series = WS
Style:
Under Table = UT
(No Flange)
Through Table -
(Contour Flange) = TC
Cover Color:
Black = BK
Silver = SL
Data
2 Keystone
Openings
= D
WS ME D TC
Table Size:
72" = 72
60" = 60
72 SL
Kit Configuration:
Single Portal Kit = SK
Double Portal Kit = DK
SK
Example: WSMEDTC72SLSK-2
WSMEDTC60SLSK Modular Power & Work Surface Portal Quick Kit for 5'
WSMEDTC60SLSK-2 Table – Kit contains two 4 wire, 2 circuit connectorized
cables each 25.5" in length (one M/F and one F/F) with
black cable covers and 4 cable clamps for mounting. Also
one work surface portal with 2 power outlets accessible
from table surface and 2 convenience power outlets
accessible from under the table, 2 keystone openings for
communications and one silver flange cover. Portal is wired
for circuit 1. For circuit 2 wired portals, order the "-2"
suffixed part number.
10"
31.5" FM
31.5" FF
10"
25.5" FM
25.5" FF
Table Length 72"
Table Length 60"
Part Number Description
Through Table Access – Single Enhanced Portal Kits
Wiring Configuration:
Portals wired
for circuit 2 = -2
Portals wired
for circuit 1 = Blank
-2
NOTE: Enhanced units have cable management loops and convenience outlets
under the table for powering routers or other active electronics.
Work Surface Modular Power Kits Ordering Information
1
2"
[
305mm]
2 5/32"
[55mm]
3
5/32"
[
80mm]
10"
[254mm]
NOTE: Kit configurations assume there is 1/2" of cabling on each
side of the table to make the table-to-table connections.
NOTE: Kits include portal(s), flange(s) cables and mounting clips.
Enhanced Portal Kit shown. Cables and Connectors are
wired for two circuits. Portals are either circuit 1 or circuit 2.