Cut Sheet

4
WSMEDTC72SLDK Modular Power & Double Work Surface Portal Quick Kit
WSMEDTC72SLDK-2 for 6' Table – Kit contains three 4 wire, 2 circuit
connectorized cables; two 12" in length (one M/F and one
F/F) and one 29" (F/F), all with black cable covers and 8
cable clamps for mounting. Also two work surface portals
each with 2 power outlets accessible from table surface
and 2 convenience power outlets accessible from under
the table, 2 keystone openings for communications and
one silver flange cover. Portals are wired for circuit 1. For
circuit 2 wired portals, order the “-2” suffixed part number.
NOTE: Kit configurations assume there is 1/2" of cabling on each
side of the table to make the table-to-table connections.
WSMEDTC60SLDK Modular Power & Double Work Surface Portal Quick Kit
WSMEDTC60SLDK-2 for 5' Table – Kit contains three 4 wire, 2 circuit
connectorized cables; two 12" in length (one M/F and one
F/F) and one 17" (F/F), all with black cable covers and 8
cable clamps for mounting. Also two work surface portals
each with 2 power outlets accessible from table surface
and 2 convenience power outlets accessible from under
the table, 2 keystone openings for communications and
o
ne silver flange cover. Portals are wired for circuit 1. For
circuit 2 wired portals, order the “-2” suffixed part number.
10"
12" FM
29" FF
12" FF
1
0"
Table Length 72"
T
able Length 60"
10"
12" FM
17" FF
1
2" FF
1
0"
Work Surface Modular Power Kits Ordering Information (continued)
Part Number Description
Through Table Access – Double Enhanced Portal Kits
Part Number Description
WSMPDUT72BKSK Modular Power & Work Surface Portal Quick Kit for 6' Table –
WSMPDUT72BKSK-2 Kit contains two 4 wire, 2 circuit connectorized cables each 33"
in length (one M/F and one F/F) with black cable covers and 4
cable clamps for mounting, one black work surface portal with 2
power and 2 keystone openings for communications. Portal is
wired for circuit 1. For circuit 2 wired portals, order the “-2”
suffixed part number.
WSMPDUT60BKSK Modular Power & Work Surface Portal Quick Kit for 5' Table –
WSMPDUT60BKSK-2 Kit contains two 4 wire, 2 circuit connectorized cables each 27"
in length (one M/F and one F/F) with black cable covers and 4
cable clamps for mounting, one black work surface portal with 2
power and 2 keystone openings for communications. Portal is
wired for circuit 1. For circuit 2 wired portals, order the “-2”
suffixed part number.
Under Table Access (When not using a flange)
10"
33" FM
33" FF
10"
27" FM
27" FF
Table Length 72"
Table Length 60"
Shown with existing table
grommet (supplied by others).