User manual

Copyright © Dr Robot Inc. 2006
9
By default, all these components will be installed under the directory “C:\Program
Files\DrRobot\WiRobot-System” unless user specifies another location during the installation.
Figure III.3 WiRobot Installation Step 3
IV. Connecting to WiRobot System
IV.1 WiFi Wireless Connecting
IV.1.1 Configuration your 802.11b (or 802.11b compatible) wireless access point/router
Configuration your 802.11b (or 802.11b compatible) wireless access point/router with following
default settings:
SSID: dri
SSID BROADCAST: Enable
AUTHENTICATION: SHARED KEY
WEP 128 bit key: 112233445566778899AABBCCDD
Router IP: 192.168.0.200
If you prefer to change the router setting, such as SSID, router IP and/or key, you have to configure
the WiFi module (see Chapter IV, session IV. WFS802b WiFi 802.11 Serial Module with Antenna) on
the robot to match your changed settings.