User manual

Copyright © Dr Robot Inc. 2006
111
This parameter displays only if the terminal type option is enabled in Disconnect Mode. If
this option is enabled, use the terminal name for the Telnet terminal type. Enter only one
name.
If the terminal type option is enabled, the unit also reacts to the EOR (end of record) and
binary options, which can be used for applications such as terminal emulation to UNIX hosts.
Channel (Port) Password
This parameter appears only if the channel (port) password option is enabled in Disconnect
Mode. If the option is enabled, set a password on the serial port.
IV.5.4 Email Configuration
Reserved
IV.5.5 WLAN Settings
Without adequate protection, a wireless LAN is susceptible to access by unauthorized
users. As such, WFS802b includes the Wired Equivalent Privacy (WEP) encryption
standard as an additional means of security.
To modify WLAN and WEP settings, select 4 WLAN from the Change Setup menu.
Enable WLAN
The current value is displayed in parentheses. By default, WLAN is enabled on WFS802b.
Enable WLAN (Y) ?
Find Network Name
Enter the name of the network in which the WFS802b unit resides. The current value is
displayed in parentheses.
Find network name (DRI_IBSS) ?
Enable Ad Hoc Network Creation
The current value is displayed in parentheses. By default, Ad Hoc network creation is enabled
on WFS802b.
Enable Ad Hoc network creation (Y) ?
Name (DRI_IBSS) ?
Country 0=US, 1=FR, 2=JP, 3=Other (0) ?
Channel (11) ?
Enter Y to enable Ad Hoc network creation and display configurable parameters:
1. At the Name prompt, enter the network name as text and hit Enter. The default name
displays in parentheses.
2. Select a Country by entering 0, 1, or 3. By default, 0 (United States) is selected. Press
Enter.
3. At the Channel prompt, enter the WFS802b’s channel setting.