User manual

Copyright © Dr Robot Inc. 2006
116
IV.6 Configuration using Web-Manager
This chapter describes how to configure the WFS802b using Web-Manager, DrRobot’s
browser-based configuration tool. The unit’s configuration is stored in nonvolatile memory
and is retained without power. The unit performs a reset after the configuration is changed
and stored.
This chapter includes the following topics:
. Accessing WFS802b using Web-Manager
. Network Configuration
. Server Configuration
. Host List Configuration
. Channel 1 and Channel 2 Configuration
. WLAN Configuration
. OEM Pin Configuration
. Updating Settings
IV.6.1 Accessing WFS802b using Web-Manager
Follow the instructions to configure the unit’s MAC address
1. Using Serial Port to set the IP.
For more information on the Serial
Port Access, see “Server” on page 98.
2. Configure WLAN parameter.
For more information on the Serial Port Access,
see “WLAN” on page 111.
Figure IV.1 Web-Manager
The main menu is displayed in the left side of the Web-Manager window.
Note: Alternatively, access the WFS802b’s Web-Manager if it is
connected to the network by entering its IP address in a web browser.