User manual

Copyright © Dr Robot Inc. 2006
122
the Connection Settings page for the selected channel.
2. In the available fields, enter the following information:
Connect Protocol
Protocol Select TCP from the pull down menu.
Figure IV.6 TCP Connection Settings
3
. In the available fields, enter the following information:
Connect Mode: Passive Connection
Accept Incoming Select Yes to accept incoming connections.
Password
Required
Determines whether a password is required for an incoming passive
connection. Field is not available when a password is set for Telnet
mode.
Password If Password Required was set to Yes, enter the password for passive
connections.
Connect Mode: Active Connection Port Settings
Active Connect Select None to disable Active Connect. Otherwise, indicate the
connection type from the available list. Never Accept Incoming rejects
all external connection attempts. Accept with modem_control_in
Active accepts external connection requests only when the
modem_control_in input is asserted. Cannot be used with Modem Mode.
Always Accept accepts any incoming connection when a connection is