User manual

Copyright © Dr Robot Inc. 2006
126
Channel network. The default value is 11.
Ad Hoc Country From the pull down menu, select a country for the Ad Hoc network. The
default is United States.
Wireless Network Security
Security As an additional security measure, enable WEP on the WFS802b. By
default, WEP is disabled on WFS802b.
Authentication Select an authentication scheme (None or Shared) from the drop down
menu.
Encryption Select the encryption type from the pull down menu. 128 bits is the
default encryption.
Encryption Key Field is enabled when WEP is selected as the Security type. Enter the
Encryption Key in hexadecimal value
Advanced Settings
Data Rate WFS802b permits the control of the transmission rate. Select the data
rate (in Mbps) from the pull down menu.
Radio Power
Management
Power management reduces the overall power consumption of the
WFS802b unit. Selecting Enable increases the response time.
IV.6.7 OEM Pin Configuration
There are 11 configurable hardware pins on the WFS802b unit. For each pin, configure the
pin function, communication direction, and its activity level.
To configure the WFS802b’s OEM Configurable Pins:
1. Click Configurable Pins from the main menu to open the Configurable Pins window.
Figure IV.9 Configurable Pins Settings