User manual

Figure I.5 Physical Connection

4. Close all WiRobot software on PC (e.g. WiRobot Gateway and all sample applications)

5. Start the hyper-terminal (which comes with MS Windows OS), give a name to this new

connection and choose the COM port that is connected to the PMS5005 (normally COM1 or

COM2) as shown in the following figure:

Figure I.6 Choosing COM Port Connection

6. Configure the COM port with the setting 115200, 8, N, 1, Xon/Xoff and turn on the “Echo

typed characters locally” under Properties - > Settings -> ASCII Setup. If your PC is slow, you

can turn off this “echo” option for shorter download time but you will not see the download

process during the upgrade.