User manual

Figure I.7 COM Port Setting

7. The lower left corner of the hyper-terminal will show the connection status. If the hyper-

terminal is still not connected, click the connect icon on the hyper-terminal to establish the

connection (don’t turn on the PMS5005 yet!).

8. Choose “Transfer -> Send Text File” from the toolbar and set “files of type” to ALL. Locate

the PMS5005 firmware HEX file only by HIGHLIGHTING the file (e.g. PMS5005_v11.dri).

Please make sure that you DON’T double click the file or click the “Open” button

Figure I.8 Locating the HEX File