User manual

7. The lower left corner of the hyper-terminal will show the connection status. If the hyper-

terminal is still not connected, click the connect icon on the hyper-terminal to establish the

connection (don’t turn on the PMB5010 yet!).

8. Choose “Transfer -> Send Text File” from the toolbar and set “files of type” to ALL. Locate

the PMB5010 firmware HEX file only by HIGHLIGHTING the file (e.g. robot.hex). Please

make sure that you DON’T double click the file or click the “Open” button

Figure II.6 Locating the HEX File

9. Please read step 10-13 ahead before turning on the PMB5010 in this step

10. After you turn on the PMB5010, you should see the text “Dr. Robot Inc. PMB5010

following figure: