User manual

(xxx).

Note: The easiest way to enter Setup Mode is to hold down the x key at the terminal

(or emulation) while resetting the unit. This must be done within three seconds of

resetting the WFS802b.

3. Upon connection, the following information displays:

Figure IV.3 MAC Address

MAC address 00204AFFFF30

Software version 05.3 (040129) WPT

Press Enter to go into Setup Mode

4. To enter the Setup Mode, press Enter within 5 seconds

Note: Connection fails if Enter is not pressed within 5 seconds.

The configuration settings display, followed by the setup menu options:

Figure IV.4 Setup Menu Options

Change Setup:

0 Server

1 Channel 1

2 Channel 2

3 Email

4 WLAN

5 Expert

6 Security

7 Factory defaults

8 Exit without save

9 Save and exit Your choice ?

5. Select an option on the menu by entering the number of the option in the Your choice ?

field and pressing Enter.

View the current configuration by pressing Enter from the Change Setup menu. To

enter a value for a parameter, type the value and press Enter. To confirm a current

value, press Enter (without inputted parameters).

6. When finished, save the new configurations (9 Save and exit). The unit reboots

IV.5.2

Server Configuration

The unit’s basic server (i.e. network) values display upon selecting Server (option 0 from the

Change Setup menu). The following sections describe the configurable parameters within the