Quick Start Guide
FCC Statement
Any Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates,uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician
for help.
This device has been tested and meets the FCC SAR limit
demand
ISED compliance statement
This device contains licence-exempt transmitter(s)/receiv-
er(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is
subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
L’émetteur/récepteur exempt de licence contenu dans le
présent appareil est conforme aux CNR d’Innovation,
Sciences et Développement économique Canada applica-
bles aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en comprom-
ettre le fonctionnement.
This equipment complies with Directive 2014/53/EU
radiation exposure limits set forth for an uncontrolled
environment. End user must follow the
specific operating
instructions for satisfying RF exposure compliance. This
transmitter must not be co-located or
operating in conjunction with any other antenna or
transmitter.The portable device is designed to meet the
requirements for exposure to radio waves established by
European Union market (France).
NFC Recognition Area
Magnetic Card Reader
Indicators
Screen
Power
Camera(optional)
IC Card Slot
Scan Key
Charging
Interface
Speaker
Camera
Battery Cabin
· Do not place the terminal in extremely hot or cold
conditions.
· Do not place terminal together with computer disc, credit
card, travel card or any other magnetic items; otherwise,
the information stored in magnetic cards will be affected.
· Do not place the terminal in fire.
· Do not disassemble the terminal or any accessories by
yourself.
· Please use a moist and anti-static cloth to clean the
terminal screen.
· Warning: Please replace the batteries with the same type
and rating to avoid battery explosion.
· Do not expose the battery in strong direct sunlight, near
heat sources or any similar conditions.
· Please recycle or dispose of old, weak, or worn batteries
in accordance with local, regional, or national law or
regulation.
· Do not use detergent with chemical or scrub particle
which may damage the terminal body or screen.
· Please keep the terminal in a safe place and avoid crush or squeeze
that may cause a damage on screen or camera.
· When the user use the third party’s root tool or update with
unauthorized operation system, it will bring risk to the normal
operation system.
· The maximum operating temperature of the product should not
exceed 40℃.
· Product battery should not be placed in an overheated environment
(over 60℃).
Product Details
Main Specifications
Safety Alert
Certificate Warning
Operation System
CPU
Communications
Memory
2GB RAM,16GB ROM
TDD/FDD/WCDMA/HSPA/
GSM/EDGE/WIFl2.4+5G/
Qualcomm Quad-Core
Android OS
Screen
5.5"LCD
Camera
BT
BT5.0, Dual Mode
Wi-Fi
NFC
Magnetic Card
Reader
IC Card Reader
PSAM Card Slot
SIM Card Slot
Battery
WLAN802.11a/b/g/n/ac
13.56MHz
Track 1/2/3
ISO7816,Encrypted Head
2 Slots
2 Slot, 3V/1.8V
3.85V,3420mAh, Li-polymer
Input
5V 2A
QUICK START GUIDE
P5L
1.NFC Recognition Area NFC: to recognize NFC
card
2.Indicators: indicating terminal working status
3.Screen: display and touch operation
4.Power: long press to power on/off; short press to
activate or shut down the screen
5.IC Card Slot IC: to swipe IC card
6.Magnetic Card Reader: to swipe magnetic Card
7.Charging Interface: to insert micro USB 5 pin
plug of charger
8.Speaker: to play sound
9.Camera: scanning and photography
10.Charging Base Connector: to connect with the
charging base
11.Battery Cabin: to place and protect the battery
SAR statement
This equipment complies with FCC/ISED radiation exposure
limits set forth for an uncontrolled environment. End user
must follow the specific operating instructions for satisfying
RF exposure compliance. This transmitter must not be
co-located or operating in conjunction with any other
antenna or transmitter.
The portable device is designed to meet the requirements
for exposure to radio waves established by the ISED. These
requirements set a SAR limit of 1.6 W/kg averaged over one
gram of tissue. The highest SAR value reported under this
standard during product certification for use when properly
worn on the body.
Cet équipement est conforme aux limites d’exposition aux
rayonnements FCC/ISED établies pour un environnement
non contrôlé. L’utilisateur final doit suivre les instructions
spécifiques pour satisfaire les normes. Cet émetteur ne doit
pas être co-implanté ou fonctionner en conjonction avec
toute autre antenne ou transmetteur.
Le dispositif portatif est conçu pour répondre aux exigences
d’exposition aux ondes radio établie par le développement
énergétique DURABLE. Ces exigences un SAR limite de 1,6
W/kg en moyenne pour un gramme de tissu. La valeur SAR
la plus élevée signalée en vertu de cette norme lors de la
certification de produit à utiliser lorsqu’il est correctement
porté sur le corps.
CAUTION
Risk of explosion if the battery is replaced by an incorrect
type;
disposal of a battery into fire or a hot oven, or mechanically
crushing or cutting of a battery, that can result in an
explosion;
leaving a battery in an extremely high temperature
surrounding environment that can result in an explosion or
the leakage of flammable liquid or gas;
a battery subjected to extremely low air pressure that may
result in an explosion or the leakage of flammable liquid or
gas.
Use Restriction: This device is restricted to indoor use when
operating in the 5150 to 5250 MHz frequency range.
Non-compliance with the above restrictions may result in
violation of RF exposure guidelines.