DIGITAL VIDEO RECORDER Product Specification Manual HRX-1635/HRX-1634/HRX-835A
Digital Video Recorder Product Specification Manual Copyright ©2022 Hanwha Techwin Co., Ltd. All rights reserved. Trademark Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Copyright of this document is reserved. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization.
overview overview ImPorTanT SafeTY InSTrucTIonS Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean the contaminated area on the product surface with a soft, dry cloth or a damp cloth.
overview aTTenTIon ● ● ● ● Products supporting each feature IL Y A RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACÉE PAR UNE BATTERIE DE TYPE INCORRECT. METTRE AU REBUT LES BATTERIES USAGÉES CONFORMÉMENT AUX INSTRUCTIONS. Function Products Ne pas ingérer la pile, risque de brûlure chimique. Fan HRX-1635/HRX-1634/HRX-835A Ce produit contient une pile de type bouton/pièce de monnaie.
overview conTenTS overvIeW 3 InSTallaTIon 9 connecTIng WITH oTHer DevIce 12 3 Important Safety Instructions 3 Before Start 5 Contents 6 Features 6 Package Contents 7 Part Names and Functions (Front) 8 Part Names and Functions (Rear) 9 Checking the Installation Environment 9 Rack Installation 9 Power 10 HDD Addition 12 Connecting to an External Device 12 Connecting the USB 12 Connecting the Alarm Input/Output 13 Connecting the Network English _5
overview feaTureS Package conTenTS The product records video and audio from cameras to a hard disk, and enables playback from the hard disk. It also provides remote monitoring environment for video and audio over the network using a remote computer. Please unwrap the product, and place the product on a flat place or in the place to be installed. Please check the following contents are included in addition to the main unit. ● Provides new UI 2.
overview HrX-1634 ParT nameS anD funcTIonS (fronT) HrX-1635/HrX-835a REC HDD ALARM NETWORK BACKUP POWER DIGITAL VIDEO RECORDER REC Recorder Mouse Quick Guide HDD ALARM NETWORK BACKUP POWER DIGITAL VIDEO RECORDER USB HrX-1634 Power Cable Power Adaptor SATA Power Cable REC HDD ALARM NETWORK BACKUP POWER DIGITAL VIDEO RECORDER SATA Data Cable (2 ea) HDD Fixing Screw (8 ea) Bracket Rack (2 ea)/Screw(4 ea) Part Names Functions REC : Lights on when recording is in progress.
overview ParT nameS anD funcTIonS (rear) Part Names VIDEO IN Functions Video Signal Input Port (BNC type connector). HrX-1635 Ground Connection Port for connecting a separate ground cable. ■ For safe handling of the device, please add a ground wire. SPOT BNC type of output port for the Spot signal. AUDIO OUT Audio Signal Output Port. AUDIO IN Audio input signal port. POWER Terminal to connect power to. ● ALARM ● HrX-835a RS485/422 ALARM IN : Alarm input ports.
installation installation Please take note of the followings before using this product. ● Do not use the product outdoor. ● Do not spill water or liquid in the connection part of the product. ● Do not impose the system to excessive shock or force. ● Do not pull out the power plug forcefully. ● Do not disassemble the product on your own. ● Do not exceed the rated input/output range. ● Use a certified power cord only. ● For the product with an input ground, use a grounded power plug.
installation HDD aDDITIon Installing the HDD Make sure to unplug the power cord from the wall outlet to prevent possible electric shock, injury or product damage. Please consult your provider for further information on HDD installation since improper installation or settings may damage the product. ■ ■ Number of HDDs supported - HRX-1635 : Max. 8 EA - HRX-835A : Max. 4 EA - HRX-1634 : Max. 2 EA Make sure to unplug the power cord from the wall outlet before proceeding with the installation.
installation How to install an HDD in HrX-1634 4. Fix the bracket with the HDD to the recorder with screws. 1. Loosen the screws on the left/right sides and back and slide the cover back to remove it. 2. Connect the SATA/power cable of the HDD to the connector on the motherboard. 5. Connect the SATA/power cable of the HDD to the connector on the motherboard. Refer to the figure below for the location/connector number of the HDD. 3. Fix the HDD to the bottom of the recorder with screws.
connecting with other device connecTIng To an eXTernal DevIce connecTIng THe alarm InPuT/ouTPuT ■ The Alarm In/Out port at the back is composed of the following. The following figures are based on Model HRX-1635. AC L1 AC L2 FG 30VDC 2A, 125VAC 0.5A MAX Alarm MAX DC18V, Typical DC12V, 2A Sensors HDMI OUT ■ VIDEO OUT (VGA) GND AUDIO OUT Unrated or improper power source may cause damage to the system. Ensure that you use only the rated power source before pressing the POWER button.
connecting with other device connecting the network camera connecTIng THe neTWork ■ For more information about network connection, see "Setting the Network" in the Wisenet Recorder User Manual. example) ex) IP : 192.168.1.100 network connection via ethernet (10/100/1000BaseT) Switch Switch Windows Network Viewer Network Camera ex) IP : 192.168.1.20 network connection via router Network Camera ex) IP : 192.168.1.
connecting with other device connecting the rS-485 Device Connect [TX/RX +,-] port on the rear to PTZ camera or system keyboard. TX + - TX + - Data + - RX+- PTZ Camera System keyboard TX + - Hanwha Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.