MICROPHONE User Manual SPA-M1000
Microphone User Manual Copyright ©2021 Hanwha Techwin Co., Ltd. All rights reserved. Trademark Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Copyright of this document is reserved. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization.
overview WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT. To prevent injury, this apparatus must be securely attached to the Wall/ceiling in accordance with the installation instructions. CAUTION CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
overview IMPORTANT SAFETY INSTRUCTIONS 22. Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area. 1. Read these instructions. 23. Do not place this apparatus near conductive material. 2. Keep these instructions. 24. Do not attempt to service this apparatus yourself. 3. Heed all warnings. 25. Do not place a glass of water on the product. 4. Follow all instructions. 26. Do not install near any magnetic sources. 5.
CONTENTS OVERVIEW INSTALLING AND CONNECTING 10 Important Safety Instructions Features Checking the components Names and functions of each part 10 11 Installation Connecting to other devices STARTING 12 ENVIRONMENT SETTINGS 16 USING THE MICROPHONE 21 12 12 15 Connecting to a PC Access product Logging in 16 16 17 19 20 Home Screen configuration Maintenance System management Network settings Time settings 21 22 23 23 24 Power on Broadcasting Using CP event button Using VP event button Using men
overview FEATURES ~ Paging communication over the network You can broadcast a variety of messages, such as announcements to a designated area within the network, using the paging system by connecting it to a network audio server or controller mode speaker. ~ Gooseneck microphone You can use the gooseneck microphone conveniently by adjusting its position flexibly to fit a user environment.
CHECKING THE COMPONENTS Make sure all of the following components are included. (Accessories may vary by sales region.) ! OVERVIEW This product is a network microphone that is to be connected to the controller device (e.g., audio server, speaker/audio module set to controller mode) of the network audio system. To use the microphone, you must connect it to the network and register a device via a webbased integrated control software and an RM source.
overview NAMES AND FUNCTIONS OF EACH PART Name Front p a PUSH b MONITOR o AUX POWER MAX MIN MAX MIN MAX -6dB c +3dB +6dB MENU PRESET 1 2 3 PREV 2 d 4 5 6 NEXT 3 CHIME 4 7 8 9 * 0 # ALL 5 TALK e Name n i NEXT button m l k j i h g j PREV button NETWORK 0dB VOLUME 1 CHIME button CHIME MIC MIN h a Microphone release button Releases the gooseneck microphone. b Microphone connection port Connects the gooseneck microphone.
Rear ! OVERVIEW DC 24V MIN POWER RESET NETWORK PoE a b c Name a POWER input terminal AUX IN MAX MIC VOL d e Function Description Supplies DC 24V power by connecting to the supplied power adapter. A button that returns the product settings to the factory default values. Press the button for approximately 12 seconds to reset and reboot the product. b RESET switch J Do not disconnect the power until product resetting is complete. Doing so may cause malfunctions.
installing and connecting Disconnecting from the Gooseneck Microphone INSTALLATION Disconnect the gooseneck microphone from the device while pressing the button on top of the gooseneck microphone. Precautions Before Installation ~ Be careful that cables do not become stuck in the wrong places and that the covering of electric wires is not damaged, as this can cause product damage or fire. ~ If the product is forcibly assembled by applying excessive force, the product may be damaged.
Network Cable Specifications CONNECTING TO OTHER DEVICES MIN POWER RESET NETWORK PoE AUX IN Specifications RJ45 (10/100BASE-T) Ethernet 10/100Base-T Cable Category 5e Remark MAX MIC VOL Max Distance 100 m PoE Support IEEE 802.3af DC resistance ≤ 0.125 Ω/m Power Router or switching hub (PoE supported) External audio source J ` When connecting to each device, be sure to power off the connected device before connecting.
starting You can set the product’s network environment according to the user’s network connection configuration. To change your product’s network configuration settings, follow these instructions to access the product. CONNECTING TO A PC ACCESS PRODUCT Various functions, including maintenance and environment settings, are available on the product website. 1. Set an IP address to 192.168.1.x, the same band as the product, in the network property of the PC. (e.g. 192.168.1.
Registering using Device Manager If the product is connected to a network which includes a computer where the device manager is installed, you can search products, set up passwords, change IP addresses, upgrade firmware, and access web pages. Please refer to the manual of the Device Manager Program for more information. When you select products one by one ~ Select from the [IP Assign] menu, then set its IP address.
starting 4. When you press [Search] on the list screen, it can be queried with the set IP address and . ~ If its status is not queried with , please log in on the [Credential] menu to be queried with . J ` If you apply the product password in ; in the device manager, M ` You can update to the latest firmware for the product using the device manager.
Registering with the product’s initial IP address LOGGING IN If you connect only one product to the switch hub, it is possible to set up the password even on the web page. Use the password set for the admin account. 1. Enter the product’s initial IP address into the web browser’s address bar. 1. Enter “admin” in the field. 2. The admin account password must be registered when accessing the product for the first time. When the window appears, please enter a new password. 3.
environment settings HOME SCREEN CONFIGURATION MAINTENANCE If you connect to the product using a web browser, you can check the system management, network settings, time settings, logs, etc. Getting to Know the Home Screen a b c View Log Logs generated in the product can be checked. The log items are different for each product, and they are recorded when the log operation occurs. d 3 4 5 1. Click ; on the Home screen. g Name a f e Function Description 2.
SYSTEM MANAGEMENT 5. It will take up to 10 minutes to upgrade the system and reboot the product. The software version information of the product is available in the upper-right corner of the Home screen. Various functions are available, including System Upgrade, Change Password, System Check, Restart, and Reset. Changing the Password ! ENVIRONMENT SETTINGS You can change the passwords of each account. 1. On the Home screen, click ; . 2.
environment settings Unlock Account Setting the System Check Time For all accounts except the admin account, if you enter the wrong password more than 5 times when logging in, the account will be locked for 30 seconds and you will not be able to log in. The admin account can reset the number of retries by checking the number of login retries for each account and whether the account is locked. Sets the time for the system check. The system reboots automatically at the set time every day. 1.
Restarting System You can restart the system without disconnecting the power when a system reboot is needed. NETWORK SETTINGS You can change the network settings according to the user’s network connection configuration. 1. On the Home screen, click ; . ! ENVIRONMENT SETTINGS 1. On the Home screen, click ; . 2. Click the [Apply] button in . 3. Click when the system restarting window appears.
environment settings TIME SETTINGS Set the time and date accurately or it may cause problems in operating the broadcast. 1. On the Home screen, click ;
using the microphone When using the microphone, you can check the input number and current status through the status indicator of the product. Standby Screen By pressing the
using the microphone 4. When the number registration is complete, press the [TALK] button on the product body. BROADCASTING 1. If you press any number button while on the standby screen, the broadcasting mode (Zone, Group, CP) set in and the entered number will be displayed on the screen. Request talk Waiting . . . TALK ZONE SPA-M1000 Zone Mode 2 CALL STATION :MIC #:AUX :CLEAR #:ADD M:EXIT 192. 168. 1.
3. When the registration of the CP event number is completed, press the [TALK] button on the product body. USING CP EVENT BUTTON If the microphone event is set as in the of the controller mode speaker or audio server, you can generate the event by pressing the CP event button (5 key) on the left side of the microphone. 1. Press the desired CP event button on the standby screen.
using the microphone USING MENU Talk Type Settings If you press the [MENU] button on the product body, you can change the and settings, or you can check the network information and firmware version. 1. Press the [MENU] button on the product body. Each time the [MENU] button is pressed, ;;; Network Information ; the Firmware Information screen will switch sequentially.
Checking Network Information You can check the network information set in the product. 1. Press the [MENU] button on the product body. 2. The information screen will be displayed. ! USING THE MICROPHONE MENU NETWORK IP : XXX.XXX.XXX.XXX MASK: XXX.XXX.XXX.XXX DNS : 8.XXX.XXX.XXX MAC: XX:XX:XX:XX:XX:XX MENU:NEXT PREV:EXIT 3. Press the [PREV] button to close the Network information screen. Checking Firmware Version Information You can check the current firmware version of the product. 1.
