User Manual

12_ starting
starting
You can set the product’s network environment according to the user’s network connection
configuration.
To change your product’s network configuration settings, follow these instructions to access
the product.
CONNECTING TO A PC
The PC should be connected to the same network as the product when accessing the product for the first time.
Use a network cable to connect the product’s NETWORK port to the switching hub that is connected with the
PC.
1
2
3
4
5
1 2 3
4 5 6
7 8 9
*
0 #
VOLUME
MONITOR
MIC
TALK
PUSH
MAXMIN
AUX
MAXMIN
CHIME
MENU
PRESET
PREV
NEXT
CHIME
POWER
-6dB 0dB
NETWORK
+3dB +6dB
MAXMIN
ALL
M
`
Connect the supplied DC power cable to receive power, or connect a switching hub that supports PoE or PoE+
ACCESS PRODUCT
Various functions, including maintenance and environment settings, are available on the product website.
1. Set an IP address to 192.168.1.x, the same band as the product, in the network property of the PC.
(e.g. 192.168.1.100)
2. Run a web browser on the PC.
M
`
An available web browser is Google Chrome (Version 99.0.4844.82 or higher).
Google Chrome is available at www.google.com/chrome.
`
It can be used in Chrome as it is a supported web browser. For the computer OS, it can be used in Windows 10 or
Mac 10.15 (Catalina) or 11 (Big Sur).
Product validation was performed on Windows 10 21H2 and the Mac 10.15.7 and 11.6 versions.
3. The initial IP address of all products is 192.168.1.99.
Before installing the product, it is recommended to set a static IP address for separate products.
M
`
If multiple products are connected concurrently to the same switch hub with the initial IP addresses, the web page
cannot distinguish the IP addresses, resulting in failing to set passwords.
`
Use Device Manager to set the initial password and IP address to use.