User Manual

English _15
! STARTING
Registering with the product’s initial IP address
If you connect only one product to the switch hub, it is possible to set up the password even on the web
page.
1. Enter the product’s initial IP address into the web browser’s address bar.
2. The admin account password must be registered when accessing the product for the first time.
When the <Change Password> window appears, please enter a new password.
J
`
A password should contain 8 or more characters, and if it contains fewer than 9 characters, then a combination of
3 or more English uppercase/lowercase letters, numbers, or special characters must be used. If it includes 10 to 16
characters, a combination of 2 or more types must be used.
`
It is recommended not to use the same character repeatedly or consecutive keyboard inputs as passwords for
enhanced security.
3. A product login screen appears after successfully setting the password.
LOGGING IN
Use the password set for the admin account.
1. Enter “admin” in the <ID>field.
2. Enter a password in the <Password> field.
3. Click the [Login] button to move to the Home screen of the product.
After 30 minutes of inactivity on the website, you will be automatically logged out.
J
`
If you forget the password, the product has to be initialized by pressing the
RESET
button for about 12 seconds.
Therefore, make sure to write your password down or remember it.
If you have already logged in, the system can be initialized in the <
Environment Setting
>
;
<
System
Management
> menu of the web page.
`
Do not disconnect the power
until the system initialization is complete after pressing the [
RESET
] button of the
product or during product resetting. It will take more than 10 minutes to reboot after resetting the product.
M
`
To change the network settings according to the user’s network connection configuration, use the <
Network
Setting
> function in <
Environment Setting
>. (
Page 19)
`
Available accounts are divided into admin, setup, user, and guest by access authority level. Go to <Environment
Setting>
;
<System Management>
;
<Change Password> to change the passwords of each account. (
Page
17)
`
A maximum of five users can log in to the product at the same time. The
“Exceed the maximum user ”
screen
will appear if there is an attempt to log in while the maximum number of users are logged in, and it will show the
currently connected PC IP addresses.