User Manual

environment settings
20_ environment settings
TIME SETTINGS
Set the time and date accurately or it may cause problems in operating the broadcast.
1. On the Home screen, click <Environment Setting>
;
<Time Setting>.
~
The current time is set if you select GMT of your location on <Standard Time Zone>
~
For the local network which is not connected to the external Internet, select <User Setting> in <Time
Setting> and enter the time manually to use it.
~
If it is connected to the external Internet, select <Auto Configuration> in <Time Settings> to synchronize
the time to the standard time of the time server.
~
For the domain address in the <Time Server Address> input field, use time.google.com / time.apple.com
/ pool.ntp.org / north-america.pool.ntp.org / time.bora.net / clock.isc.org.
Please check if the domain address provides time information which reflects Daylight Saving Time.
~
<Next Synchronization Time> automatically changes from the previously synced time every 8 hours.
~
Click [Synchronization Now] to synchronize the time to the time server.
2. Click [Apply] to apply the set Time and Date information.
J
`
If the product is used in a local network environment without an external Internet connection, the time information
may become wrong due to the product’s accumulated time errors. To accurately schedule the broadcast time, it is
recommended to install a separate time server device which uses GPS signals, or enter its audio server IP address
(SPA-S1000) in the <
Time Server Address
> field of other products to synchronize the time information of the
audio servers.
`
If the product is used in a local network environment without the external Internet connection, Daylight Saving Time
is not automatically reflected as it is not synchronized with an external time server.
In countries where Daylight Saving Time is applicable, it is recommended for the system administrator to use the
product by changing the time manually for the start and end dates of the Daylight Saving Time.