User Manual

English _21
! USING THE MICROPHONE
using the microphone
When using the microphone, you can check the input number and current status through the
status indicator of the product.
1
2
3
4
5
1 2 3
4 5 6
7 8 9
*
0 #
VOLUME
MONITOR
MIC
TALK
PUSH
MAXMIN
AUX
MAXMIN
CHIME
MENU
PRESET
PREV
NEXT
CHIME
POWER
-6dB 0dB
NETWORK
+3dB +6dB
MAXMIN
ALL
CALL STATION
SPM-M1000
PRI. 192. 168. 1. 99
SEC. 0. 0. 0. 0
Zone Mode
CALL STATION
SPA-M1000
192. 168. 1. 99
Zone Mode
POWER ON
Initial Screen
1. When the product is powered on, a <Welcome> message will be displayed on the status indicator.
2. After about 5 seconds, the <Booting ...> message will be displayed, and then the <Initializing ...>
message will appear.
3. When the product is booted up, the status indicator will be displayed as a standby screen.
Booting . . .
Initializing . . .
SPA-M1000
Welcome
CALL STATION
SPA-M1000
192. 168. 1. 99
Zone Mode
Standby Screen
By pressing the <MENU> button on the main body of the product, it will be divided into three modes
according to the <3. Talk Protocol> setting in the <Talk type> menu as follows. You can switch each mode
with the [PRESET] button on the product body.
CALL STATION
SPA-M1000
192. 168. 1. 99
CP Mode
If <Talk Protocol> is in the Isls-CP
CALL STATION
SPA-M1000
192. 168. 1. 99
Group Mode
If <Talk Protocol> is in the Isls-Group
CALL STATION
SPA-M1000
192. 168. 1. 99
Zone Mode
If <Talk Protocol> is in the Isls-Zone
M
`
If there is no button input for about 30 seconds on the standby screen, it will enter sleep mode and the status
indicator will turn off.
Press any button to switch from sleep mode to the standby screen.