User Manual

using the microphone
22_ using the microphone
BROADCASTING
1. If you press any number button while on the standby screen, the broadcasting mode (Zone, Group, CP)
set in <Talk Protocol> and the entered number will be displayed on the screen.
CALL STATION
SPA-M1000
192. 168. 1. 99
Zone Mode
ENTER NUM: 2
ZONE
:
CLEAR #
:
ADD M
:
EXIT
2
M
`
The number specified in the zone registration and group setting menus of the controller device will be selected for
Zone and Group mode.
The VP number specified in the Event & Preset menu of the controller device will be selected for CP mode.
`
While on the Number input screen, press the
[MENU]
button on the product body to end number input and switch
to the standby screen.
`
An incorrectly entered number can be deleted by pressing the
[
]
button. (Role of Backspace)
2. Press the [ # ] button to register the entered number.
ENTER NUM: 2
ZONE
:
CLEAR #
:
ADD M
:
EXIT
#
ENTER NUM:
ZONE
:
CLEAR #
:
ADD M
:
EXIT
2
3. If there are more numbers to broadcast, press the appropriate Number button and then press the [ # ]
button.
3
#
ENTER NUM:
ZONE
:
CLEAR #
:
ADD M
:
EXIT
2
ENTER NUM:
ZONE
:
CLEAR #
:
ADD M
:
EXIT
2 3
ENTER NUM: 3
ZONE
:
CLEAR #
:
ADD M
:
EXIT
2
M
`
To cancel a registered number, press the button of the number and then press the
[
]
button to delete the number.
4. When the number registration is complete, press the [TALK] button on the product body.
2
:
MIC
#
:
AUX
Talking . . .
TALK
Request talk
Waiting . . .
5. When the <Talking...> screen is displayed, start broadcasting with the microphone.
J
`
If the product is not registered as an RM source in the controller device of the network audio system, the
<
Request
talk
>
screen will display for about 10 seconds and then switch back to the standby screen.
`
If the product is registered as a device and RM source and Event & Preset, Zone, and Group are normally set and
operated in the controller device, the screen will switch to
<
Talking...>
.
M
`
Press the
[
]
button on the
<Talking...>
screen to mute the microphone volume, and press the [ # ] button to
mute the external audio source (AUX) volume. You cannot mute the volume of the microphone and AUX at the same
time.
`
The way the
[TALK]
button is used depends on the product's
<Talk type>
settings. Refer to "
Talk Type Settings
"
for details. (
Page 24)
6. If you press the [CHIME] button in the <Talking...> state, the chime which is set in [Start Chime Set] will
appear. If you press it once more, the chime which is set in [End Chime Set] will appear.