User Manual
using the microphone
24_ using the microphone
USING MENU
If you press the [MENU] button on the product body, you can change the <Chime> and <Talk type> settings, or
you can check the network information and firmware version.
Each time the [MENU] button is pressed, <Start Chime Set>
;
<End Chime Set>
;
<Talk type>
;
Network
Information
;
the Firmware Information screen will switch sequentially.
Chime Settings
You can set the type of chime that indicates the start and end of a microphone broadcast.
1. Press the [MENU] button on the product body.
2. After selecting the <Start Chime Set> setting screen, press buttons 1-3 to select the desired chime
output method.
MENU
Start Chime Set
None
2Step up tone
4Step up tone
1
2
3
M
`
Before starting the microphone broadcast on the
<
Talking>
screen, if you press the
[CHIME]
button, you will hear
the chime you set at
<Start Chime Set>
.
3. Press the [MENU] button once more.
4. Press button 1 or 2 on the <End Chime Set> setting screen to select the desired chime output method.
MENU
End Chime Set
None
4Step down tone
1
2
MENU:NEXT PREV:EXIT
M
`
Before ending the microphone broadcast on the
<
Talking>
screen, if you press the [CHIME] button, you will hear
the chime you set at
<End Chime Set>
.
5. Press the [PREV] button to exit the chime settings.
Talk Type Settings
You can set the [TALK]button usage method when making a microphone broadcast.
1. Press the [MENU] button on the product body.
2. After selecting the <Talk type> setting screen, press buttons 1 or 2 to select the desired method.
~
<Toggle>: If you press the [TALK] button, the <
Request talk Waiting> screen will appear, and after a
while, the screen will switch to the <Talking> screen and microphone broadcasting will be
available.
~
<Push to talk>: If the <
Request talk Waiting> screen appears while pressing the [TALK] button,
<Talking> screen will appear after a while. Then, microphone broadcasting will be
available.
MENU
Talk type
Toggle
Push to talk
Talk Protocol
1
2
3
3. Press the [PREV] button to exit the <Talk type>settings.
Talk Protocol Settings
You can set the communication protocol method with the controller device the product is registered with.
1. Press the [MENU] button on the product body.
2. After selecting the <Talk type> setting screen, press button 3 to select <Talk Protocol>.
3. Select the desired protocol method.
~
<
Isls-CP>: It operates in CP Mode. If you enter the CP event button (5key) or 10key button on the
microphone body and press the [TALK] button, the VP event set in the <Event & Preset>
menu of the controller device will occur.
~
<Isls-Group>: It operates in Group Mode. If you press the 10 key button on the microphone body and
press the [TALK] button, it will broadcast to the group set in the <Group Settings>
menu of the controller device.
~
<
Isls-Zone>: It operates in Zone Mode, and if you input the 10 key button on the microphone body
and press the [TALK] button, it will broadcast to the zone set in the <Zone registration>
menu of the controller device.
MENU
Talk protocol
Isls-CP
Isls-Group
Isls-Zone
1
2
3
4. Press the [PREV]button to exit the <Talk Protocol>settings.
M
`
On the standby screen, press the
[PRESET]
button on the microphone body to switch the
<Talk Protocol>
method.