Users Manual

PREFACE
OPERATION INSTRUCTION
TECHNICAL PARAMETERS
TROUBLE SHOOTING

OPERATION INSTRUCTION OPERATION INSTRUCTION
Dear customer: Thank you for purchasing the M8 Bluetooth Speaker, For your
beer users experience please read the user manual carefully before use. Enjoy
the music journey!
Please keep this user manual for your later references!
PACKAGE CONTENT
·
1* Type-C cable
· 1*M8 Main device
· 1* 3.5mm Aux in cable
· 1* User Manual

Turn on two M8 speakers enter into bluetooth mode. Short press “ ”boon of
one speaker. TWS light starts to flash, the speaker will automacally search the other for
TWS connecon,if they connected successfully, two speakers will switch into le and right
channels automacally. Repeat the bluetooth connecon operaon and connect to phone,
 



5.0 7200mA
5V/2A
40W
865g

Le channel
(Main Speaker)
Right channel
(Auxiliary Speaker)
+


Party lights on is defaulted seng when you turn on speaker, Short press“ ”key
to turn on/off lights.

Please insert TF card in speaker,the speaker will switch mode automacally with a
prompt tone “TF card mode”, the speaker will play music saved in card automacally, TF
card memory maximum is 32G.
(This mode is only apply to some models, please consult local dealer for details.)

KEY FUNCTION DEFINITION
Strap hook
Power: Long press Turn on/off
Short press Play/Pause
Bluetooth/Phone:
Long press force to disconnect
Bluetooth connecon
Short press switch Bluetooth/
Aux in mode
Answer/Hang off phone call
Plus: Short press to increase volume
Long press to next track
Minus:
Short press to decrease volume
Long press to previous track
Lights key:
Short press turn on/off lights
TWS pairing:
Short press
on/cancel TWS connecon
Long press to clear away TWS pairing
Charging light/Power bank light
Bluetooth light
TWS light
AUX interface
TF card slot
Type-C interface
Power bank output interface
1.Turn on speaker enter into bluetooth mode,the bluetooth light starts to flash.Open
the bluetooth on your device search for “M8” and connect to your speaker.If its
connected successfully,you will hear a prompt tone that“device paired . The bluetooth
light is always on, now you can play music on your device by bluetooth.
2.When the bluetooth is connected successfully and you make calls with phone, the
voice will automacally enter into the bluetooth hands-free mode.Short press “ ”key
to answer incoming call,Long press to reject call.
Please connect 3.5mm audio cable to the headphone of the phone/computer output
interface, short press key switch to AUX in mode.When you hear a prompt
tone“AUX in mode”, then you can play music.
Due to the lower power supply capability,most computer’s USB interface can not
meet speaker’s operaonal requirements.It is not recommended to use the computers
USB for charging synchronously when you play music in the AUX in mode while connecng
computer.
If they connected succesffully ,music will play on the speaker shows dual stereo sound
effect.
Note:This funcon requires two M8 speakers,make sure both are turned on and in the
bluetooth mode.
No bluetooth connecon to any other devices before TWS paring.
When TWS is connected, short press“ ”key of one speaker to cancel the
Do not use power adapter that has not been cerficated by safety cerficaon.
Power adapter with output 5V-2A is recommended for charging.
1.When you hear a prompt tone “Out of baery”,Please charge speaker as quickly
as possible.
2.This speaker supports self-adapon charging . It’s able to choose charging current
automacally according to the external rated power of the adapter, When charging by
USB interface on computer, the current is smaller and it takes longer me to complete
charging.
3.When speaker is charging, the power light is red and always on. When speaker is
fully charged,the power light is green and always on.

This product is waterproof on daily basis condions,and it can washes normally. Do not
soak the product in water for a long me
.

The speaker will automacally shut down to save power under below circumstances.
1.In bluetooth mode,aer 20 minutes waing for no device pairing.
2.In any modes, short press “ ”key pause for 20 minutes without any operaon the
speaker will shut down automacally, Please long press the power key to turn it on again.
The funcon of power bank is forbidden when the speaker is charging. Both states can
not exist at the same me.
1.USB-A OUTPUT : 5V/1A(Power bank funcon only works when speaker is turned on.
2.Turn on speaker insert the standard USB cable into the output interface of power bank,
connect the other end to the mobile. At this me the power bank indicator is green, the green
indicator will be off aer mobile being fully charged.
3.Turn off speaker in the process of using speaker to charge the mobile,speaker will stand
by,power bank funcon works normally, and speaker can be awakened by long press the power
key.
The USB and Type C interfaces of the same charing line are forbidden to be inserted into
the speaker simultaneously.
1.Can not connect to bluetooth or no sound when playing music?
Please make sure the speaker is in bluetooth mode,and also make sure your device
supports bluetooth funcon and bluetooth has already been turned on searching for devices.
Check if there are too many bluetooth devices around ,which might bring difficules of the
searching process. Please turn off other bluetooth device.
2.What if TF card doesn’t respond ?
Please make sure TF card is in good quality,and check whether the audio file is MP3 playing
format,If all problems above are excluded , it might be TF card compability issue, you can
consider of formang TF card to FAT32 or change a different TF card.
Manufacture:
Shen zhen ZhiQi Technology Co., Ltd.
Address:
B902 Baochengtai Square, No.38 Qinfu road, Liuyue Community, Henggang
Street,Longgang District,Shenzhen. China
V.1.0.0
WWW.WISEPNT.COM
制造商:深圳市智旗科技有限公司
地址:中国广东省深圳市龙岗区六约社区勤富路38号
保成泰智汇广场B902
M8说明书 80克书纸 10页5开双面印刷
120x75(mm)
WIRELESS
BLUETOOTH
SPEAKER
用户说明书
USER MANUAL
前言 操作说明
(1) 蓝牙模式
操作说明
技术参数
疑难解答
尊敬的客户:感谢您购买此产品,为了能够更进一步的了解
产品,使用前请仔细阅读本说明书,祝你体验愉快!
请保存此说明书以供后面参考!
1、开机后,进入蓝牙模式,蓝牙灯闪烁,打开您的蓝牙,设备
搜索到“M8”选择连接,连接成功,音响提示“蓝牙已连接”蓝
牙灯常亮,即可播放音乐。
2、蓝牙连接成功后使用手机拨打电话,音响进入蓝牙免提通
。来电短按“ ”接听,长按拒接。
包装内容
·1*Type-C充电线
·1*M8主机音响
·1*3.5毫米AUX外接音频线
·1*用户说明书
(4) TWS无线立体声播放
台音响转换成左右声道。重复蓝牙连接操作将音响连接手机,
播放手机音乐即可实现无线立体声音效。
注: 此功能需要两台音响,并都开机在蓝牙模式才能使用。
在TWS配对前没有跟任何设备进蓝牙连接。
在TWS互联状态,短按其中一台音响“ ”键即可取消互联。
将两台M8开机,进入蓝牙模式后,短按其中一台“
键TWS灯闪烁,自动搜索另一台音响进行组队,组队成功,两
开机默认开启派对灯光,短按“ ”键开启/关闭灯效。
蓝牙版本
电池容量
充电电压
额定功率产品重量
5.0
7200mA5V/2A
40W865克
(6) Type-C快速充电
请勿使用未通过安规认证的电源适配器。
建议使用输出为5V-2A的电源适配器进行充电。
1、音响提示“设备电量不足”,请尽快为音响充电。
2、音响支持自适应充电,根据外接电源适配器功率自动选
择充电电流,当使用电脑USB接口为本音响充电,充电电流小,
充电时间会比较长。
3、充电时红灯常亮,充满绿灯常亮。
温馨提示:
1、本产品是基于生活防水,可以正常冲洗切勿将音响长期浸
泡水中。(如因进水导致音响功能故障,我司留有最终解释权
节能省电:
在下列情况下音响将自动关机节省电量。
1、蓝牙模式下,等待配对持续二十分钟无设备连接蓝牙。
2、任意模式下,短按“ ”暂停二十分钟后无操作将自动
关机,再次开机请长按电源键。
左声道(主机) 右声道(副机)
+
(2) AUX音频输入模式
请将3.5mm音频线连接到手机/电脑的耳机输出口,短按“
键切换到AUX模式,音响提示“外接音源模式”即可播放
音乐。
因多电脑的USB接口供电能力不能满足音响工作需求,建
议使用AUX连接电脑播放音乐时,不要使用电脑USB口给音响同
步充电。
(5) 炫酷派对灯光
(3) TF卡模式
请将TF卡插入音响,音响会自动切换至并语音提示“读卡音
乐模式”自动播放卡内音乐,内存最大支持 32G TF卡
(此功能仅适用于部分机型,详情请咨询当地经销商。)
(7) 移动电源输出
2.开机后将标准USB线插入移动电源输出口,另外一端连接手
机,此时移动电源指示灯呈绿色状态,充满电绿灯熄灭。
3.当在使用音响对手机充电过程中将音响关机,此时音响会
进入待机状态,移动电源正常对外充电,长按开机键唤醒音响。
禁止将同一条充电线的USB接口和Type-C接口同时插入音响。
对音响充电时移动电源功能是禁止状态,两种状态不能同
时存在。
1、USB-A输出:5V/1A(音响开机时移动电源功能才有作用)。
1、蓝牙无法连接或播放音乐没有声音怎么办?
请先确认音响是否处于蓝牙模式,再确认您的蓝牙设备是否
支持蓝牙功能并将其打开,检查音响是否处于蓝牙搜索状态,如
果周边蓝牙设备太多,可能会造成搜索困难,请关闭其他蓝牙
2.T F卡播放没有反应怎么办
请确认T F有无质量并检查卡中音频文件是否为M P3
播放格如果以上问题均排则可能是TF卡兼容性问,可
T F卡格式化为FA T 32式,或者尝试更换其他TF 卡。
按键功能详解
操作说明
挂绳扣
电源键:长按 开/关机
短按 播放/暂停
蓝牙/电话键:
长按 强制断开蓝牙连接
短按 切换蓝牙/AUX模式
接听挂断电话
加号键:短按 音量加
长按 下一曲
减号键:短按 音量减
长按 上一曲
灯光键:
短按打开/关闭灯光
TWS配对键:短按 开启/取消
TWS互联 长按清除配对
充电指示灯/移动电源指示灯
蓝牙指示灯
TWS指示灯
AUX接口
TF卡插槽孔
Type-C接口
移动电源输出接口
MODEL
M8
无线蓝牙音响

Summary of content (2 pages)