Full Product Manual

Folding Tools
Wiss folding tools are ideal for making long, uniform bends in sheet metal or folding
channels in ductwork. Each tool has a 3/8” deep and a 1” deep folding channel. Strong
16-gauge steel construction prevents channel deformation and maintains bending
accuracy. Each folding channel has two sight holes that help ensure proper depth
alignment. Available in 12”, 18”, and 24” lengths.
Cable Tie Tensioning Tool
The Wiss cable tie tensioning tool rmly tightens nylon
cable ties when securing ex duct to take-o collars. It
oers easy one-hand operation and a cut-o lever that
trims excess strap. This tool works on both light and
heavy-duty cable ties, up to 175-pound tensile strength.
Ratchet Pipe Cutters
Wiss ratcheting pipe cutters are designed to work in tight spaces
where traditional cutting tools will not t. While the cutting
wheel rotates around the pipe, the handle ratchet
only needs to move as little as 10 degrees.
Ideal for cutting brass, copper, aluminum,
and other thin-walled conduit material.
Spare cutting wheel stored in handle
of medium and large versions.
Hand Crimpers
Wiss crimpers are commonly used to form male tting
ends on round metal pipe, guttering, and downspouts.
Wiss crimpers make long, shallow crimps that produce
tight-tting connections, while not concaving pipe
or obstructing airow. Wiss aviation snip style handle
grips and an easy operating range give exceptional
comfort and reduce hand fatigue.
Sight holes to ensure
material is fully seated into
channel before bending.
3/8” depth
folding
channel
1” depth
folding
channel
WC5S 5-Blade Crimper, 1 1/4” depth
WC3S 3-Blade Crimper, 1 1/4” depth (not shown)
WC5L 5-Blade Crimper
(1 5/8” depth)
WT1 Cable Tie Tensioning Tool
WF12 12” Folding Tool WF18 18” Folding Tool (not shown) WF24 24” Folding Tool (not shown)
Tightening and
cut-o can be done
one-handed.
Ideal for making long, uniform
bends. Also permits 180° bends for
folding drive cleat channels.
NEW
NEW
NEW
HVAC Forming & Specialty Tools . . . Tools to get the job done right.
WRPCMD Ratchet Pipe Cutter, cuts 1/4” to 7/8” diameter
WRPCSM Ratchet Pipe Cutter, cuts 1/8” to 1/2” diameter (not shown)
WRPCLG Ratchet Pipe Cutter, cuts 5/16” to 1 1/8” diameter (not shown)
Hand Seamers
Wiss hand seamers oer exceptional power for bending
and attening sheet metal. Highly visible 1/4” depth
markings and durable forged blades give accurate bends.
Wiss aviation snips style handle grips improve comfort.
Handle span is in optimum grip range when fully closed,
maximizing hand strength for more bending power.
Non-slip cushion
grips similar to
Wiss aviation
snips
Compound
lever action
Visible 1/4” depth
markings
Precision-forged
blades
WS3 3” Hand Seamer
WS4 3” Oset
Hand Seamer
WS6 6”
Hand Seamer
NEW
More bending power