User's Manual

Wistron
NeWeb
Wistron NeWeb Corporation
20 Park Avenue II, Hsinchu Science Park, Hsinchu 308, Taiwan, R.O.C.
Phone: [phone] Fax: [phone]
Website: www.wneweb.com
Wistron NeWeb Confidential Document
24
3. Select Profile Editor tab and edit the settings. Click OK to save the modifications.
 Configuration Name: This name identifies the configuration. This name should be
unique.
 Network Name (SSID1) (SSID2) (SSID3): The name of the wireless network. This
name cannot be longer than 32 characters. If the field is set to be “ANY” or is left
blank, your computer will connect to an AP with the best signal strength.
 Network Connection: Specifies the mode of the network. Two options are
“Infrastructure” and “Ad Hoc”.
 Power Saving: Minimizes power consumption while maintaining network
connectivity and high data transfer performance. In Ad Hoc mode, Power Savings
function cannot be enabled. The power management options are:
• Off: PC Card is powered up at all times.
• Normal: PC Card sleeps less often and stays asleep for a shorter period.
• Maximum: PC Card sleeps more frequently and stays asleep as much as
possible.
 Wireless Mode: Three options are “802.11b”, “802.11a”, “802.11g”, “Super A”,
“Super G” or “Auto”. “Auto” allows the use of either 802.11a, 802.11g or 802.11b
mode.