User Manual Part 2

Additional Note for Windows 2000 to install Packet Protocol

You should add the Packet Protocol under Windows 2000, if the Packet

Protocol does not exist in your system. The installation procedure will be

slightly different from the Windows 98SE installation. A message will be

prompted to guide you to auto-install the Packet Protocol. Follow the

on–screen instructions as listed below to complete the IEEE802.11b

WLAN Utility and driver installation.

1. Please insert the IEEE 802.11b WLAN PC Card (refer to section 3.3).

After the installation is completed, click on “Yes”.

2. If your IEEE802.11b WLAN PC Card installed successfully, you will

enter the “Packet protocol Auto Installation“ frame, click on “OK“ and

system will auto-install the Packet Protocol.