User Manual Part 2

3.3 Install the PCMCIA Card

1. The IEEE802.11b WLAN driver and utilities are included on the

accompanying installation CD. Please follow the installation

procedures in Section 3.2 “Install the IEEE802.11b WLAN Utility/Driver”.

(Your PCMCIA card will not work properly if the driver and utilities are

not installed correctly.)

2. Make sure that there is an empty PCMCIA slot for the IEEE802.11b

WLAN PC card. Insert the PC Card and then the system will

automatically start.

If you are asked to insert the “Windows 98SE CD-ROM” during the

installation, insert your “Windows 98SE CD-ROM” and click “Yes”. Once

the setup task is completed, the “Microsoft Internet Explorer” should start

up. Please close it.

3. When the PCMCIA card setup task is completed, you need to start the

IEEE 802.11b WLAN Utility. To start the utility, please refer to the

Section 3.4 “Utility Start-up Configuration”.