User Manual

Basic Configuration of the 802.11G ACCESS POINT

This section describes the basic configuration procedure for the 802.11G ACCESS POINT. It

describes how to set up the 802.11G ACCESS POINT for Infrastructure BSS operation, and

the configuration of the local LAN environment.

Although the Command Line Interface (CLI) may also be used to configure the 802.11G

ACCESS POINT, the browser-based configuration mechanism is the tool of choice.

The 802.11G ACCESS POINT is designed so that all basic configuration may be effected

through the a standard Web browser such as Internet Explorer.

From a PC or a Wireless client that has been configured as described in Chapter 2, enter the IP

address of the 802.11G ACCESS POINT as the URL in your browser.

Note: The IP address of your PC must be in the same IP subnet as the 802.11G ACCESS POINT.

Chapte