User Manual

IEEE 802.11g Access Point User’s Guide
22
Note: If you change the AP’s IP address, as soon as you click on FINISH you will no longer be able to
communicate with your 802.11G ACCESS POINT. You need to change your IP address and then re-boot
your computer in order to resume the communication.
Advanced Settings
The advanced settings tab on the top row of buttons will allow you to perform modifications
that normally you may not need to do for basic operations. The exception to this is changing
your password from the default factory setting. This is highly recommended for security
purposes.
Password Settings
The default factory password is “password”. To change the password , press the Password
Settings button to enter the Password Settings screen, enter the current password followed by the
new password twice. The entered characters will appear as asterisks
.
System Management
Clicking the System Management button allows system related parameters to be configured
for the 802.11G ACCESS POINT.