User Manual

IEEE 802.11g Access Point User’s Guide
26
Enable DHCP server: To enable the DHCP server option of the 802.11G ACCESS POINT
Dynamic IP Address Assignment
When the DHCP server option is enabled, the 802.11G ACCESS POINT will assign IP
addresses from an available IP address pool (e.g., 192.168.1.1 – 192.168.1.254). If you wish to
avoid using certain addresses (so as to assign them to other special devices), you can specify
the available IP address pool in the From/To boxes and the press SUBMIT.
From: The beginning IP address of a range
To: The ending IP address of a range
Static IP Address Assignment
If you require certain PCs to always obtain the same IP addresses, enter each PC’s MAC
address and the corresponding IP address desired and press ADD
MAC address: The MAC address of the PC
IP address: The IP address to assign to the PC with the above MAC address
DHCP Client List: The list of all static MAC-address/IP-Address pairs configured. Entries
may be deleted by checking the Select box followed by pressing DELETE SELECTED.
MAC Filtering Settings
The 802.11G ACCESS POINT allows you to define a list of MAC addresses that are allowed
or denied to access the wireless network
Disable MAC address control list: When selected, no MAC address filtering will be
performed.
Enable GRANT address control list: When selected, data traffic from devices listed will be
allowed in the network.
Enable DENY address control list: When selected, data traffic from devices listed in the
table will be denied/discarded by the network.