User Manual

39
 ipAddr, netmask, or xxx.xxx.xxx.xxx means any ip address or network mask, where
xxx is a decimal integer between 0 and 255;
 the term string means a string of characters up to the specified length, which may be
enclosed in double quotes (“) (required if the string contains embedded blanks;
 Names representing filters and MAC addresses should be up to 30 characters in
length; password and SNMP community read/write strings are up to 15 characters
in length. When the password and SNMP community write string are entered, they
are echoed back as a string of “*”s for protection, while other parameters, such as
WEP keys, are echoed back the way they are typed (in clear text).
Command List
From a functional point of view, CLI commands will be grouped into the following categories:
(1) System
(2) Port
(3) Filtering
(4) DHCP Server
(5) SNMP
(6) Diagnostics
(7) Security
(8) Wireless
The command format will be described in the following sections, some with description and
examples as follows:
Command Syntax
Description: the description of the command is given here.
Example:
Command>>> command (with parameters)
Output …
System Commands
Login
Description: When you use telnet to connect to the 802.11G ACCESS POINT, you will see
the following message from your telnet screen: