User Manual

IEEE 802.11g Access Point User’s Guide
40
Wireless AP Management Console, Version: rev_no
Please enter your password: ********
Logout
Description: This command logs the user out of the system.
Example:
Command> logout
Help
Example:
Command> help
Commands are categorized as follows:
(1) System (2) Port (3) Filtering
(4) DHCP Server (5) SNMP (6) Diagnostics
(7) Security (8) Wireless (9) Statistics
Please enter a selection number [1..9] for more detailed information:
Reset system
Description: This command allows the user to reset the system and may cause unsaved
configurations to be lost. A confirmation message will be displayed.
Example:
Command> reset system
Warning: Reset system may cause unsaved configuration to be lost;
do you want to continue (y/n)?
Set telnet port <port number>
Description: This command allows the user to change the Telnet service port. This
information is displayed in the “show telnet” and “show system” commands.
Example:
Command> set telnet port 2323
Warning: Changing the port number will close existing sessions; do
you want to continue (y/n)? y
Telnet service port: 2323
Set telnet timeout <min>
Description: This command is used to set the telnet session time-out value (in minutes). The
default value is 10 minutes. This means that if the user does not type anything for 10 minutes,
the telnet session will be terminated automatically. This information is displayed in the “show
telnet” command.