User Manual

IEEE 802.11g Access Point User’s Guide
42
Command> set prompt "Yes, Master"
Yes, Master>
Set system contact <"name">
Description: This command sets the system contact information. The maximum number of
characters allowed is 60. This information is displayed in the “show system” command.
Example:
Command> set system contact "John Doe, pager: [phone]"
System contact: John Doe, pager: [phone]
Set system location <"location information">
Description: This command sets the system location. The maximum number of characters
allowed is 60. This information is displayed in the “show system” command.
Example:
Command> set system location "101 ABC Drive, Sunnyvale, CA 94086"
System location: 101 ABC Drive, Sunnyvale, CA 94086
Set system name <"system name">
Description: This command sets the system name. The maximum number of characters
allowed is 60. This information is displayed in the “show system” command.
Example:
Command> set system name "Wireless_AP_012"
System Name: Wireless_AP_012
Set date <mm-dd-yy>
Description: This command sets the current date in the system.
Example:
Command> set date 2-18-02
Time (GMT-8:00): Mon Feb 18 11:20:24 2002
Show date
Description: This command displays the current date setting. This information is also
displayed in the “show time” command.
Example:
Command> show date
Date: 4-12-01
Set time <hh:mm:ss>
Description: This command sets the time of the day (based on 24-hour clock).