User Manual

43
Example:
Command> set time 20:33:00
Time (GMT-8:00): Mon Feb 18 20:33:00 2002
Set time zone <-12:00 - +12:00>
Description: This command sets the time zone as an offset (in hours) from the Greenwich
Mean Time (GMT).
Example:
Command> set timezone –8:00
Time (GMT-8:00): Mon Feb 18 20:33:00 2002
Show time
Description: This command shows the time zone, daylight savings time, date and time of the
day. The time can be set either through the manual “set time” command, or the first time
when the user access the 802.11G ACCESS POINT through the web GUI after system reset.
In either case, the time information will be lost after a system reboot.
Example:
Command> show time
Time (GMT-8:00): Mon Feb 18 11:20:24 2002
Enable/disable upnp
Description: This command enables/disables the UPnP feature.
Example:
Command> enable upnp
UPnP is enabled
Show UPnP
Description: This command displays the UPnP setting. This information is also displayed in
the “show system” command.
Example:
Command> show upnp
UPnP is enabled
Show system
Description: This command displays system and SNMP related configuration. All of them
can be changed through individual commands, except for the S/W and H/W version
numbers that are constant for each version of the product.
Example:
Command> show system
System Name: Wireless_AP_012 Up Time: 0 months 0 days 18:29:06