User Manual

IEEE 802.11g Access Point User’s Guide
44
-------------------------------------------------------------
System description: Wireless Access Point
System contact: John Doe, pager: [phone]
System location: 101 ABC Drive, Sunnyvale, CA 94086
Community string (read-only): public
S/W Version: 1.00
H/W Version: 1.0
System IP/NetMask: 192.168.1.1/255.255.255.0
Gateway IP address: 120.1.1.1
System LAN MAC: 12-34-56-78-90-12
Wireless MAC: 00-00-11-22-33-44
Telnet port: 23 Timeout: 10 mins
Http port: 80 Timeout: 10 mins
UPnP: Enabled
STP: Enabled
Set system ip
Description: This command assigns an IP address to the system.
Example:
Command> set system ip
obtain IP address automatically(no, yes/no): no
/* if no is selected */
IP address (192.168.1.1): 192.168.1.1
IP subnet mask (255.255.255.0): 255.255.255.0
default gateway IP address (Unspecified): 192.168.1.10
DNS IP address (Unspecified): 120.1.1.1
IP address: 192.168.1.1
IP netmask: 255.255.255.0
default gateway IP Address: 192.168.1.10
DNS IP address: 120.1.1.1 (or Unknown)
Show system ip
Description: This command displays the IP address information of the system.
Example:
Command> show system ip
IP address: 192.168.1.1
IP netmask: 255.255.255.0
default gateway IP Address: 192.168.1.10
DNS IP address: 120.1.1.1 (or Unknown)
Enable/disable stp
Description: This command enables/disables the STP feature.
Example: