User Manual

IEEE 802.11g Access Point User’s Guide
46
Port
Set port wlan
Description: This command configures wireless related settings
Example:
Command> set port wlan
enter network name (WLAN): test
disable SSID broadcasting (no, yes/no):
select regulatory domain (fcc, fcc/etsi/france/spain/japan): fcc
enter channel number (10, 1-11): 10
/* Valid channel ranges are as follows
FCC: 1-11;
ETSI: 1-13;
France: 10-13;
Spain: 1-13;
Japan: 1-14; */
enable WEP encryption (no, yes/no): yes
/* if WEP is enabled */
use passphrase to generate key (no, yes/no): yes
select WEP key length (40, 40/128): 40
/* if passphrase is used */
enter Passphrase (Unspecified): abcde
generated WEP keys with passphrase:
WEP key1: XXXXX
WEP key2: YYYYY
WEP key3: ZZZZZ
WEP key4: WWWWW
select the key index to activate (1, 1-4):
/* if passphrase is not used */
enter WEP key1 (Unspecified): 11111
enter WEP key2 (Unspecified): 22222
enter WEP key3 (Unspecified): 33333
enter WEP key4 (Unspecified): 44444
select the key index to activate (1, 1-4):
>>> enter rts/cts threshold (2347, 256-2432):
>>> enter fragment threshold (2346, 256-2346): /* must be an even integer */
>>> enter beacon interval (mini-seconds) (100, 1-1000):
>>> enter DTIM interval (3, 1-65535):
Show port [<lan|wlan>]
Description: This command displays settings and operational information of the specified
port. If “show port” is issued without any argument, it means to display the summary
information of all ports. The Link State can be Up, Down, or Disabled.
Example:
Command> show port lan
Port Name: LAN
Link State: Up
Link Speed: 100Mbps
Duplex Mode: Full
Flow Control: Enabled
MAC Address: 00-01-02-03-04-05