User Manual

IEEE 802.11g Access Point User’s Guide
48
No Buffer: 0
Received WEP Errors: 0
Frame Checksum Errors: 340856
[Reason for Transmit Discards]
Wrong Source Address: 0
Retry Limit Exceeded: 3
Other Reasons: 0
Example:
Command> show port statistics
Port Received Transmitted Error
Name Frames Frame Frames
-----------------------------------------------------
lan 324246 451526 0
wlan 2626 37343 0
If no argument is used, it means all ports.
Clear port statistics <lan|wlan|all>
Description: This command clears traffic statistics for a specified port or all ports. The
argument “all” is used to clear all ports’ statistics.
Example:
Command> clear port statistics wlan
statistics counter of wlan cleared.
Filtering
Set mac filter mode <disabled|grant|deny>
Description: This command configures the operational mode of the MAC filter in the system.
When MAC filtering is enabled and configured as “deny”, the frame will be filtered (denied) if
the source MAC address of a received frame matches any entry in the MAC filter table. When
MAC filtering is enabled and configured as “grant”, the frame will be forwarded if the source
MAC address of a received frame matches any entry in the MAC filter table. Otherwise, the
frame will be filtered.
Example:
Command> set mac filter mode grant
MAC filter mode: grant
Show mac filter mode
Description: This command shows the operational mode of the MAC filtering feature
configured in the system.
Example:
Command> show mac filter mode
MAC filter mode: grant
Add mac filter <name> <mac>