User Manual

57
Command> add radius server primary
enter authenticatation (eap, mac/eap/both):
enter server IP (unspecified): 129.1.1.1
enter port number (1812, 1-65535):
enter shared secret (unspecified):
enter timeout (5, 1-60):
enter retry times (3, 1-10):
enable primary server (yes, yes/no):
Admin State: Enabled
Authentication scheme: MAC
Server IP: 129.1.1.1
Port number: 1812
Timeout value: 5 seconds
Retry times: 3
Delete radius server <primary|secondary>
Description: This command deletes the primary/secondary radius server configured in the system.
Example:
Command> delete radius server primary
primary radius server is deleted.
Enable radius server <primary|secondary>
Description: This command enables the primary/secondary radius server configured in the system.
Example:
Command> enable radius server primary
Primary radius server is enabled.
Disable radius server <primary|secondary>
Description: This command disables the primary/secondary radius server configured in the system.
Example:
Command> disable radius server primary
Primary radius server is disabled.
Show radius server [<primary|secondary>]
Description: This command shows the primary/secondary radius server configured in the system.
Example:
Command> show radius server primary
Admin State: Enabled
Authentication scheme: MAC
Server IP: 129.1.1.1
Port number: 1812
Timeout value: 5 seconds
Retry times: 3
Example: