User Manual

IEEE 802.11g Access Point User’s Guide
58
Command> show radius server
Radius server: Primary
Admin state: Enabled
Authentication scheme: MAC
Server IP: 129.1.1.1
Port number: 1812
Timeout value: 5 seconds
Retry times: 3
Radius server: Secondary
Admin state: Enabled
Authentication scheme: MAC
Server IP: 129.1.2.1
Port number: 1820
Timeout value: 5 seconds
Retry times: 3
Radius server reattempt: 60 minutes
Wireless
Set operational mode <accesspoint|wds|repeater>
Description: This command configures the device to operate in one of the three following
modes: an access point, a WDS (Wireless Distribution System), or a repeater.
Example:
Command> set operational mode accesspoint
operational mode: accesspoint
Show operational mode
Description: This command displays the current operational mode of the device, which can
be one of the three following modes: an access point, a WDS (Wireless Distribution System),
or a repeater.
Example:
Command> show operational mode
operational mode: accesspoint
Add WDS peer <name> <MAC>
Description: This command adds a WDS peer by specifying a name and its corresponding
MAC address.
Example:
Command> add wds peer Sanjose 00-02-55-F9-45-0B
Peer Name MAC Address
------------------------------------
Sanjose 00-02-55-F9-45-0B