User's Manual

1 Getting Started WNC RFID Smart Reader
Wistron NeWeb Corporation© 4
1.3 Hardware Overview- RFID Smart Reader
Front Panel
Rear Panel
WAN
Connect a standard RJ-45 Ethernet cable to the port to establish a network
connection. This feature allows you to configure settings or read the data
from the Reader on your computer via a Graphic User Interface. WAN port
supports Power over Ethernet (PoE).
LAN
Currently unavailable.
DC IN
Connect the power adapter to the Reader via this inlet to power on the
Reader.
GPIO
For GPIO purposes such as connecting a Fan-out Box, light sensor or other
sensors.
Antenna
Ports
For RF cable insertion. The Reader supports up to four antennas at the
same time. Additional connection is also possible via an optional antenna
switch.
Note: RJ-45 Ethernet cable and RF cable not included in the package.