User's Manual

4. Select “Security Setting” tab and edit the settings. Click “OK” to save the settings.

n Enable Security: Enables the WEP security when the check box is checked,

and disables the WEP security when the check box is cleared.

n Default Encryption Key: Allows you to choose one type of encryption key

to be used (Unique, First, Second, Third, or Fourth) from the drop down

menu.

n Unique Key: Defines the unique encryption key for security for the current

network configuration. Not used in Ad-Hoc mode. To use Unique Key for

security, this field should be populated. To use AES, you must specify a

Unique Key.

n Shared Keys: Defines four shared encryption keys. To use Shared Keys

for security, at least one Shared Key should be populated.

n Key Length: Defines the length of each encryption key. When the length is

changed to be a smaller number after a key is entered, the key is

automatically truncated to fit. If the length is increased again, the key will

not be automatically updated to the previous value.