User's Manual

54
when the cursor reaches the border of the Server’s screen border, it automatically
switches off the remote function.
Note! You can only turn on or off the remote control function from the Client PCs, not
from the Server PC.
Configuring BlueMux:
1. Automatic Switch: Click Configuration button and select “Enable Automatic Switch” from
the drop-down menu. If the Client PC(s) is set to enable “Enable Automatic Switch”, when
the cursor reaches the border of the screen, it automatically switches on the remote control
function. If the remote control function is on and both the Client and Server are set to
enable “Enable Automatic Switch”, when the cursor reaches the border of the Server’s screen
border, it automatically switches off the remote function.
2. Multiple Connection: From the Server PC, click Configuration button and select “Accept
multiple connection” to allow up to seven Client PCs to connect to the Server PC, otherwise
only one Client PC is allowed for the connection. When this function is disabled, the
connected Client PCs will remain connected until they decide to exit.