User's Manual
Table Of Contents
- Introducing the 802.11a/g Router
- Installing the 802.11a/g Router
- What’s in the Box?
- A physical look at the back panel
- A physical look at the front panel
- Connecting the Cables
- High Level Configuration Steps Required for the 802.11a/g Router
- Setting up a Windows PC or wireless client as DHCP clients
- Configuring a PC running MS-Windows 95/98/Me:
- Configuring a PC running MS-Windows XP/2000:
- Confirming your PC’s IP Configuration:
- Connecting More Devices Through A Switch/Hub To The 802.11a/g Router
- Basic Configuration of the 802.11a/g Router
- Advanced Settings
- Managing your 802.11a/g Router
- How to View the device Status
- How to View the System Log
- Security Log
- DHCP Client Table
- Wireless Client Table
- Bridge Table
- WAN Status
- LAN Status
- Upgrading Firmware
- How to Save or Restore Configuration Changes
- How to Restore the System Settings to the Factory Defaults
- How to Reboot your 802.11a/g Router
- What if you Forgot the Password?
- Command Line Interface
- Text Configuration
- Specification
MULTIPLE PPPOE SETTINGS
If you have selected PPPoE with Multiple PPPoE type at the ISP Settings page, you will see the
Multiple PPPoE settings page where you can add more PPPoE sessions.
For each PPPoE session, you have to assign a mnemonic name and configure similar settings as in the
primary session. In addition, you can configure LAN Type and Traffic Pattern in order to use an added
session.
LAN Type: If you enable LAN Type, you can have another subnet on your LAN environment.
Some ISP provides Group Access function that gives you a subnet to assign on your LAN
environment, and ISP will make all such subnets belonging to the same Group connected
together. A PC on such subnets can reach other PCs on the Internet within the same Group
through the session configured without NAT; it also can do the normal Internet access through
the primary PPPoE session.
Traffic Pattern: You have to configure traffic pattern(s) in order to use PPPoE sessions other
than the primary session. Any outgoing packet matching one of the traffic pattern configured will
be sent out using the corresponding PPPoE session. There are four types of traffic patterns that
you can use. After you checked a traffic pattern and clicked the APPLY button you have to
configure the details by selecting the item in the Session Table and click the EDIT TRAFFIC
PATTERN button.
IP Address Range/Network
: Packets with destination IP address within the range or network
configured are matched.
Port Range: TCP/UDP packets with the source or destination port in the configured range are
matched.
Keyword: IP packets with a payload containing a string matching the configured keyword are
matched.
NetBIOS: NetBIOS packets are matched.
Multiple PPPoE usage can be well illustrated by the following diagram.
20