User's Manual
Table Of Contents
- Introducing the 802.11a/g Router
- Installing the 802.11a/g Router
- What’s in the Box?
- A physical look at the back panel
- A physical look at the front panel
- Connecting the Cables
- High Level Configuration Steps Required for the 802.11a/g Router
- Setting up a Windows PC or wireless client as DHCP clients
- Configuring a PC running MS-Windows 95/98/Me:
- Configuring a PC running MS-Windows XP/2000:
- Confirming your PC’s IP Configuration:
- Connecting More Devices Through A Switch/Hub To The 802.11a/g Router
- Basic Configuration of the 802.11a/g Router
- Advanced Settings
- Managing your 802.11a/g Router
- How to View the device Status
- How to View the System Log
- Security Log
- DHCP Client Table
- Wireless Client Table
- Bridge Table
- WAN Status
- LAN Status
- Upgrading Firmware
- How to Save or Restore Configuration Changes
- How to Restore the System Settings to the Factory Defaults
- How to Reboot your 802.11a/g Router
- What if you Forgot the Password?
- Command Line Interface
- Text Configuration
- Specification
Description: Delete the MAC filter with the specified name.
set mac filter mode <MAC filter mode, disabled/grant/deny>
Description: Set the MAC filter mode.
show mac filter [<string up to 30 characters>]
Description: Display the MAC filter entry with the specified name. If no name is specified, this
command display all currently configured MAC filter entries.
show mac filter mode
Description: Display the currently configured MAC filter mode.
(4) DHCP Server Commands
add dhcp static <IP address> <MAC address, XX-XX-XX-XX-XX-XX>
Description: Add a static DHCP client entry with the specified IP address and MAC address.
delete dhcp static <IP address>
Description: Delete the static DHCP client entry with the specified IP address.
disable dhcp server
Description: Disable the DHCP server function.
enable dhcp server
Description: Enable the DHCP server function.
set dhcp server
Description: Configure the DHCP server related settings. This is a multi-line command, and you have
to enter the IP address pool range, gateway IP address, and lease period.
show dhcp client table
Description: Display the current dynamic DHCP clients.
show dhcp server
Description: Display the current DHCP server settings.
show dhcp static
Description: Display the current static DHCP clients.
70