User's Manual
Table Of Contents
- Introducing the 802.11a/g Router
- Installing the 802.11a/g Router
- What’s in the Box?
- A physical look at the back panel
- A physical look at the front panel
- Connecting the Cables
- High Level Configuration Steps Required for the 802.11a/g Router
- Setting up a Windows PC or wireless client as DHCP clients
- Configuring a PC running MS-Windows 95/98/Me:
- Configuring a PC running MS-Windows XP/2000:
- Confirming your PC’s IP Configuration:
- Connecting More Devices Through A Switch/Hub To The 802.11a/g Router
- Basic Configuration of the 802.11a/g Router
- Advanced Settings
- Managing your 802.11a/g Router
- How to View the device Status
- How to View the System Log
- Security Log
- DHCP Client Table
- Wireless Client Table
- Bridge Table
- WAN Status
- LAN Status
- Upgrading Firmware
- How to Save or Restore Configuration Changes
- How to Restore the System Settings to the Factory Defaults
- How to Reboot your 802.11a/g Router
- What if you Forgot the Password?
- Command Line Interface
- Text Configuration
- Specification
802.11a/g Router User’s Guide
Version = 1.00
put as the first section in a configuration file. Users
should not modify anything in this section.
[Password]
Password=000000
Password: the password for system management.
[Time]
TimeZone = +09:00
NTPstate=disable
NTPstate=enable
NTPServerType =ip
NTPServerIP=192.43.244.18
NTPServerType =name
NTPServerName=time.nist.gov
RequestInterval=24
TimeZone: the time zone of the system. Possible
values are -12:00, -11:00, -10:00, …, +00:00,
+01:00, …, +13:00.
NTPstate: enable NTP client function or not (‘enable’
or ‘disable’).
If ‘NTPstate’ is ‘enable’:
NTPServerType: how to specify the NTP server (‘ip’
or ‘name’).
NTPServerIP: the IP address of the NTP server (if
‘NTPServerType’ is ‘ip’).
NTPServerName: the domain name of the NTP
server (if ‘NTPServerType’ is ‘name’).
RequestInterval: the interval that the NTP client will
query the server periodically (unit: hours).
[Device]
IPType=static
IPAddress=192.168.1.1
IPNetmask=255.255.255.0
IPType=dhcp
LAN Interface Configuration
IPType: the LAN IP type (‘static’ or ‘dhcp’)
For ‘static’ type:
IPAddress
: the IP address of LAN
IPNetmask
: subnet mask of LAN
[ISP]
ISPType=static
ISPStaticIP=100.0.0.1
ISPNetmask=255.255.0.0
ISPGateway=100.0.0.2
ISPDNSIP=123.0.0.1
ISPType=dhcp
Hostname=name
ISPType=pppoe
PPPoEUserName=name
PPPOEPassword=password
PPPOEServiceName=service
PPPOEConnectionType=demand
_dialing
PPPOEMTU=1492
PPPOEMRU=1492
PPPOESessionType=normal
WAN Interface Configuration
ISPType
: the WAN connection type (‘static’, ‘dhcp’,
‘pppoe’, ‘pptp’).
For ‘static’ type:
ISPStaticIP: the IP address assigned by ISP.
ISPNetmask
: the netmask assigned by ISP.
ISPGateway
: the default gateway address assigned by
ISP.
ISPDNSIP: the DNS server address assigned by ISP.
For ‘dhcp’ type:
Hostname
: the host name (if any) assigned by your
ISP.
For ‘pppoe’ type:
PPPoEUserName: user name of the ISP account
PPPOEPassword
: password for the ISP account
75