User's Manual
Table Of Contents
- Introducing the 802.11a/g Router
- Installing the 802.11a/g Router
- What’s in the Box?
- A physical look at the back panel
- A physical look at the front panel
- Connecting the Cables
- High Level Configuration Steps Required for the 802.11a/g Router
- Setting up a Windows PC or wireless client as DHCP clients
- Configuring a PC running MS-Windows 95/98/Me:
- Configuring a PC running MS-Windows XP/2000:
- Confirming your PC’s IP Configuration:
- Connecting More Devices Through A Switch/Hub To The 802.11a/g Router
- Basic Configuration of the 802.11a/g Router
- Advanced Settings
- Managing your 802.11a/g Router
- How to View the device Status
- How to View the System Log
- Security Log
- DHCP Client Table
- Wireless Client Table
- Bridge Table
- WAN Status
- LAN Status
- Upgrading Firmware
- How to Save or Restore Configuration Changes
- How to Restore the System Settings to the Factory Defaults
- How to Reboot your 802.11a/g Router
- What if you Forgot the Password?
- Command Line Interface
- Text Configuration
- Specification
802.11a/g Router User’s Guide
TPRuleNetwork=60.0.0.0/24
TPRulePortRange=40000-50000
TPRuleKeyword=key pattern
type network if ‘MpppoeLanType’ is ‘enable’.
TPIPRange
: whether enable IP address range and
network traffic pattern on the session (‘enable’,
‘disable’).
TPPortRange
: whether enable port range traffic
pattern on the session (‘enable’, ‘disable’).
TPKeyword: whether enable keyword traffic pattern
on the session (‘enable’, ‘disable’).
TPNetBios: whether enable NetBIOS traffic pattern
on the session (‘enable’, ‘disable’).
The following items can appear more than one in a
multiple PPPoE entry:
TPRuleIPRange
: specify an IP address range traffic
pattern.
TPRuleNetwork
: specify an IP network traffic
pattern.
TPRulePortRange
: specify a port range traffic
pattern.
TPRuleKeyword: specify a keyword traffic pattern.
[CloneMAC]
CloneMACState=disable
CloneMAC=00-01-02-03-04-05
Clone MAC Configuration
CloneMACState: whether enable the clone MAC
function (‘disable’, ‘enable’).
CloneMAC: the MAC address to be cloned.
[Radio]
SSID=wlan
SSIDBoradcast=enable
RadioMode=11g/b
Channel=auto
PrivSeparatorState=disable
BeaconInterval=100
RTSThreshold=2347
Fragmentation=2346
DTIMInterval=3
UserLimit=100
WLAN Configuration
SSID: SSID of the WLAN.
SSIDBoradcast
: whether enable SSID broadcast.
RadioMode
: radio mode (‘11a’, ‘11at’-a turbo, ‘11sa’-
super a without turbo, ‘11sast’-super a with static
turbo, ‘11sadt’-super a with dynamic turbo, ‘11g/b’-
11g or 11b, ‘11g’, ‘11gt’-g turbo, ‘11sg’-super g
without turbo, ‘11sgst’-super g with static turbo,
‘11sgdt’-super g with dynamic turbo).
Channel: channel number (1, 2, 3… or ‘auto’).
PrivSeparatorState: whether enable privacy separator
(‘enable’, ‘disable’).
BeaconInterval
: beacon interval (unit: msec).
RTSThreshold
: RTS threshold (unit: byte).
Fragmentation: fragmentation threshold (unit: byte).
DTIMInterval: DTIM interval.
UserLimit: user limitation count.
[SecurityPolicy]
SecurityPolicy=none
WLAN Security Policy
SecurityPolicy: security policy (‘none’, ‘wep’)
77