User's Manual
Table Of Contents
- Introducing the 802.11a/g Router
- Installing the 802.11a/g Router
- What’s in the Box?
- A physical look at the back panel
- A physical look at the front panel
- Connecting the Cables
- High Level Configuration Steps Required for the 802.11a/g Router
- Setting up a Windows PC or wireless client as DHCP clients
- Configuring a PC running MS-Windows 95/98/Me:
- Configuring a PC running MS-Windows XP/2000:
- Confirming your PC’s IP Configuration:
- Connecting More Devices Through A Switch/Hub To The 802.11a/g Router
- Basic Configuration of the 802.11a/g Router
- Advanced Settings
- Managing your 802.11a/g Router
- How to View the device Status
- How to View the System Log
- Security Log
- DHCP Client Table
- Wireless Client Table
- Bridge Table
- WAN Status
- LAN Status
- Upgrading Firmware
- How to Save or Restore Configuration Changes
- How to Restore the System Settings to the Factory Defaults
- How to Reboot your 802.11a/g Router
- What if you Forgot the Password?
- Command Line Interface
- Text Configuration
- Specification
password used for authentication if
‘OSPFLanAuthType’/’OSPFWanAuthType’ is
‘MD5’.
OSPFRangeRule
: whether enable route
summarization (‘enable’, ‘disable’).
OSPFRangeEntryAreaID/OSPFRangeEntryIPaddr/
OSPFRangeEntryNetmas: a route destined to the
specified area and matching the specified network
address will be summarized.
[RADIUS]
RadiusRetryTimes=3
RadiusReattempPeriod=60
RadiusMACACLState=enable
RadiusUseBuiltinServer=disable
RADIUS Configuration
RadiusRetryTimes: number of retries before giving
up.
RadiusReattempPeriod: re-attempt period (unit:
minute).
RadiusMACACLState: whether enable MAC address
access control (‘enable’, ‘disable’)
RadiusUseBuiltinServer: whether use the built-in
RADIUS server first, if it exists (‘enable’, ‘disable’).
[PrimaryRADIUS]
[SecondaryRADIUS]
RadiusPrimaryState=enable
RadiusPrimaryIP=1.1.1.1
RadiusPrimaryPort=1812
RadiusPrimarySharedSecret=1111
RadiusSecondaryState=enable
RadiusSecondaryIP=2.2.2.2
RadiusSecondaryPort=1812
RadiusSecondarySharedSecret=22
22
External Primary/Secondary RADIUS Server
Configuration
RadiusPrimaryState
/RadiusSecondaryState: whether
use the external primary/secondary RADIUS server
(‘enable’, ‘disable’).
If the ‘RadiusPrimaryState’/’RadiusSecondaryState’ is
‘enable’, the following items have to be configured:
RadiusPrimaryIP
/RadiusSecondaryIP: the IP address
of the external primary/secondary RADIUS server.
RadiusPrimaryPort/RadiusSecondaryPort: the port
number on the external primary/secondary RADIUS
server.
RadiusPrimarySharedSecret
/
RadiusSecondarySharedSecret
: the shared secret used
for authentication with the external
primary/secondary RADIUS server.
[RadiusServer]
RadiusSvrState=enable
RadiusSvrCAState=disable
RadiusSvrEAPAuthType=md5
RadiusSvrCertPasswd=passphrase
RadiusSvrCert=Bag Attributes
localKeyID:…
RadiusSvrCACert= Ba
g
Attributes
Built-in RADIUS Server Configuration
RadiusSvrState
: whether enable the built-in RADIUS
server (‘enable’, ‘disable’).
RadiusSvrCAState
: whether enable the built-in
Certificate Authority (‘enable’, ‘disable’).
RadiusSvrEAPAuthType: the authentication method
used by the EAP function (‘md5’, ‘tls’).
84