User's Manual

39
ü The login name used for PEAP tunnel authentication, fills in automatically as
PEAP-XXXXXXXXXX, where XXXXXXXXXX is the computer’s MAC
address. Change the login name if needed.
6. Click OK.
7. Enable the profile.
4.4.7 Using PEAP-MSCHAP V2 Security
To use PEAP-MSCHAP V2 security in the WLAN 802.11a/b/g Utility, access the
Security tab in the Profile Management window.
1. On the Security tab, click WPA/WPA2 or 802.1x.
2. Select PEAP- MSCHAP V2 from the drop-down menu.